In this paper, a control-oriented soot model was developed for real-time soot prediction and combustion condition optimization in a gasoline Partially Premixed Combustion (PPC) Engine. PPC is a promising combustion concept that achieves high efficiency, low soot and NOx emissions simultaneously. However, soot emissions were found to be significantly increased with high EGR and pilot injection, therefore a predictive soot model is needed for PPC engine control. The sensitivity of soot emissions to injection events and late-cycle heat release was investigated on a multi-cylinder heavy duty gasoline PPC engine, which indicated main impact factors during soot formation and oxidation processes. The Hiroyasu empirical model was modified according to the sensitivity results, which indicated main influences during soot formation and oxidation processes. By introducing additional compensation factors, this model can be used to predict soot emissions under pilot injection. Model parameters were identified using experimental data under a few representative operating points. In order to reduce the cycle-to-cycle variation resulting in the soot estimation noise, a combustion duration calculation method is proposed to estimate CA10 and CA90. This soot model presented in this paper was validated under load-transient operating conditions and agreed with the measurement results with R2 over 0.8 during transient operations, which is sufficient enough for soot prediction as a virtual soot sensor and for control purpose.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Control-Oriented Modeling of Soot Emissions in Gasoline Partially Premixed Combustion with Pilot Injection


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Ingesson, Gabriel (Autor:in) / Yin, Lianhao (Autor:in) / Tunestal, Per (Autor:in) / Johansson, Rolf (Autor:in) / Yang, Tianhao (Autor:in) / Long, Wuqiang (Autor:in)

    Kongress:

    WCX™ 17: SAE World Congress Experience ; 2017



    Erscheinungsdatum :

    2017-03-28




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Injection Pattern Investigation for Gasoline Partially Premixed Combustion Analysis

    Ponti, Fabrizio / Stola, Federico / Silvagni, Giacomo et al. | SAE Technical Papers | 2019


    Optimization of Gasoline Partially Premixed Combustion Mode

    Rousselle, C.M. / Foucher, F. / labreche, A. et al. | British Library Conference Proceedings | 2013


    Optimization of Gasoline Partially Premixed Combustion Mode

    labreche, Amine / Rousselle, Christine Mounaim / Foucher, Fabrice | SAE Technical Papers | 2013


    SOOT MODELING IN PARTIALLY PREMIXED C2H4/AIR FLAMES

    Blacha, T. / Di Domenico, M. / Gerlinger, P. et al. | British Library Conference Proceedings | 2010


    Soot Modeling in Partially Premixed C2H4/Air Flames

    Blacha, Thomas / Di Domenico, Massimiliano / Gerlinger, Peter et al. | AIAA | 2010