Homogeneous Charge Compression Ignition (HCCI) combustion has attracted much interest as a combustion system that can achieve both low emissions and high efficiency. But the operating region of HCCI combustion is narrow, and it is difficult to control the auto-ignition timing.This study focused on the use of a two-component fuel blend and supercharging. The blended fuel consisted of dimethyl ether (DME), which has attracted interest as alternative fuel for compression-ignition engines, and methane, the main component of natural gas. A spectroscopic technique was used to measure the light emission of the combustion flame in the combustion chamber in order to ascertain the combustion characteristics. HCCI combustion characteristics were analyzed in detail in the present study by measuring this light emission spectrum. The effects of the combustion process on the engine operating characteristics were also investigated under the conditions of the two-component fuel blend and supercharging.A spectroscopic measurement technique was used to obtain the light emission spectra of the combustion flame. The results showed that the application of supercharging moderated the recombination reaction of CO and O. Notably, it was observed that post-ignition heat release occurred in two stages with the blended fuel of DME and methane when supercharging was applied, depending on the quantity of methane injected. That is attributed to the occurrence of the combustion reactions of the two fuels at different times. As a result, the rate of the cylinder pressure rise was controlled, enabling stable high-load operation. Because the quantity of DME injected determines the ignition timing, the engine load level can be adjusted by means of the quantity of methane injected and supercharging to achieve ignition near top dead center. This suggests the possibility of obtaining stable operation at even higher loads.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Analysis of Supercharged HCCI Combustion Using a Blended Fuel


    Weitere Titelangaben:

    Sae Int. J. Engines


    Beteiligte:
    Iijima, Akira (Autor:in) / Shoji, Hideo (Autor:in) / Yoshida, Koji (Autor:in) / Shimizu, Ryosuke (Autor:in)

    Kongress:

    Small Engine Technology Conference & Exposition ; 2011


    Erschienen in:

    Erscheinungsdatum :

    08.11.2011


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Analysis of Supercharged HCCI Combustion Using a Blended Fuel

    Shimizu, R. / Iijima, A. / Yoshida, K. et al. | British Library Conference Proceedings | 2011


    A Study of Supercharged HCCI Combustion Using Blended Fuels of Propane and DME

    Iijima, Akira / Shoji, Hideo / Suzuki, Hirotaka et al. | SAE Technical Papers | 2014


    An Analysis of Autoignition and Combustion Characteristics in a Supercharged HCCI Engine Using Gaseous Blended Fuels

    Shimizu, R. / Ishikawa, Y. / Iijima, A. et al. | British Library Online Contents | 2012


    A Spectroscopic Study of the Effects of Multicomponent Fuel Blends on Supercharged HCCI Combustion

    Iijima, Akira / Emori, Go / Shoji, Hideo et al. | SAE Technical Papers | 2012


    A Spectroscopic Study of the Effects of Multicomponent Fuel Blends on Supercharged HCCI Combustion

    Asanuma, M. / Iijima, A. / Yoshida, K. et al. | British Library Conference Proceedings | 2012