The objective was to rank piston friction and noise for three piston architectures at three cold clearance conditions. Piston secondary motion was measured using four gap sensors mounted on each piston skirt to better understand the friction and noise results. One noticeable difference in friction performance from conventional designs was as engine speed increased the friction force during the expansion stroke decreased. This was accompanied by relatively small increases in friction force during the other strokes so Friction Mean Effective Pressure (FMEP) for the whole cycle was reduced. Taguchi's Design of Experiment method was used to analyze the variances in friction and noise.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Part 1: Piston Friction and Noise Study of Three Different Piston Architectures for an Automotive Gasoline Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Madden, Dermot (Autor:in) / Kim, Kwangsoo (Autor:in) / Takiguchi, Masaaki (Autor:in)

    Kongress:

    SAE 2006 World Congress & Exhibition ; 2006



    Erscheinungsdatum :

    03.04.2006




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Automotive Gasoline Engine Piston Noise, Sources and Solutions

    Whitacre, John P. | SAE Technical Papers | 1990


    Automotive gasoline engine piston noise, sources and solutions

    Whitacre,J.P. / Zollner,US | Kraftfahrwesen | 1990


    Gasoline engine piston pin tick noise

    Moshrefi,N. / Mazzella,G. / Yeager,D. et al. | Kraftfahrwesen | 2007


    Gasoline Engine Piston Pin Tick Noise

    Yeager, Dave / Mazzella, Gary / Moshrefi, Nasser et al. | SAE Technical Papers | 2007