This work addresses the problem of fatigue strength prediction of crankshaft fillet rolling processes to improve its accuracy. It is empirical to usually consider the effect of fillet rolling process on crankshaft fatigue performance. The fatigue performance of rolling process is mainly determined by induced compressive residual stresses, increased hardness and reduced roughness. Because the first two factors are difficult to measure the arc surface of fillet rolled cranks, it is difficult to predict the enhanced rate of crankshaft rolled performance to baseline unrolled’s. In this work a prediction method of fatigue strength for ductile cast iron crankshafts rolling process is presented. This method indirectly predicts the effect of the increased hardness on fatigue performance by the resonant bending fatigue test and modelling of crankshaft fillet rolling dynamic for the induced compressive residual stress. The finite element (FE) model for the resonant bending fatigue test rig is validated by the dynamic stresses measured by the strain gauges. The dynamic model of rolling process is solved with an implicit finite element method (FEM) and validated by measurements of rolling displacements. Finally, this method is applied to a 1.5l I4 gasoline engine, in which crankshaft dynamic loads are calculated with Elastohydrodynamic (EHD) simulations.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Prediction Method of Fatigue Strength for Crankshaft Fillet Rolling Process


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Qing, Huibin (Autor:in) / Shen, Huixian (Autor:in) / Kang, Liyun (Autor:in) / Zeng, Qingqiang (Autor:in) / Yang, Wu (Autor:in) / Yin, Xiuting (Autor:in) / Zhan, Zhang Song (Autor:in)

    Kongress:

    International Powertrains, Fuels & Lubricants Meeting ; 2017



    Erscheinungsdatum :

    2017-10-08




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A Prediction Method of Fatigue Strength for Crankshaft Fillet Rolling Process

    Yang, Wu / Yin, Xiuting / Zhan, Zhang Song et al. | British Library Conference Proceedings | 2017


    Potentials of Crankshaft Fillet Rolling Process

    Cevik, M.C. / Hochbein, H. / Rebbert, M. et al. | British Library Conference Proceedings | 2012


    Fatigue Failure of Rollers in Crankshaft Fillet Rolling

    Pan, J. / Choi, K. S. / Ho, S. | SAE Technical Papers | 2004


    Fatigue Failure of Rollers in Crankshaft Fillet Rolling

    Choi, K.S. / Pan, J. / Ho, S. et al. | British Library Conference Proceedings | 2004


    Improvement of fatigue strength for RR-crankshaft with fillet cold rolling

    Araki,S. / Takami,M. / Hada,S. et al. | Kraftfahrwesen | 1995