In order to determine the area where knock occurs in a single cylinder engine, an acoustic methodology needs a minimum of four simultaneous pressure measurements in the combustion chamber. A specific cylinder head gasket integrating 12 pressure sensors has been developed and tested. The gasket is based on a bonded multilayer technology including high temperature piezoelectric cells, metallic and insulating sheets and printed circuit films. The total thickness is close to 1.25 mm (1/20 inch) and allows a straight forward substitution of the original gasket without modification. The sensors have large frequency bandwidth (typically 3-100 kHz) and withstand severe conditions (heat, combustion, pressure, vibrations, static pre-stress, electromagnetic fields and shocks). Signal processing adaptation of the dedicated exploitation software has brought good success for the single cylinder prototype, which remains operational after 100 hours of extreme conditions running (high knock). The technology is currently under development for multi cylinder industrial engines, with 4 to 8 sensors per cylinder.
Development of a Multi-Sensors Head Gasket for Knock Localization
Sae Technical Papers
SAE 2003 World Congress & Exhibition ; 2003
03.03.2003
Aufsatz (Konferenz)
Englisch
Development of a multi-sensors head gasket for knock localization
Kraftfahrwesen | 2003
|A multi sensors head gasket to detect and locate knock / Last improvements
British Library Conference Proceedings | 2008
|A multi sensors head gasket to detect and locate knock / Last improvements
SAE Technical Papers | 2008
|A multi sensor head gasket to detect and locate knock - last improvements
Kraftfahrwesen | 2006
|Cylinder head gasket development
British Library Online Contents | 1996
|