Diesel engines are very efficient prime movers in their power range. Fuel is directly injected into the combustion chamber. Performance and emission characteristics of diesel engines are highly influenced by the fuel spray parameters and atomization of the injected fuel. As the emission regulations become stringent, it is very important to optimize the combustion in internal combustion engines for different fuels including alternative fuels. Spray visualization using optical techniques play a very important role to analyze macroscopic spray parameters and fuel atomization behavior. In the present experimental study, an important alternative CI engine fuel, Karanja oil and its blends with diesel have been investigated for their spray parameters and fuel atomization relative to mineral diesel. These parameters are different for the two fuels because of difference in the viscosity and density of the fuels. Combustion chamber pressure is a dominant factor, which strongly influences the spray characteristics. This research is a comparative study of the effect of ambient pressure on macroscopic spray parameters such as spray tip penetration, spray cone angle and spray area, of mineral diesel, Karanja oil (K100) and blends (K5, K20). Experiments were carried out in a constant volume spray visualization chamber under different chamber filling pressure (1, 4, 7 and 9 bars) at a fuel injection pressure of 200 bars. The light intensity on the illuminated spray was analyzed to find the atomization level of different fuels. Spray parameter like spray tip penetration, cone angle and the spray area were found to be higher for Karanja oil (K100) as compared to blends (K20 and K5) and mineral diesel. It was observed that as the concentration of Karanja oil in the blend decreases, atomization actually improves. It was also found that with increasing chamber pressure, atomization of fuel becomes relatively superior.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Macroscopic Spray Parameters of Karanja Oil and Blends: A Comparative Study


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Mobility Conference ; 2012



    Erscheinungsdatum :

    09.01.2012




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Macroscopic and Microscopic Spray Characteristics of Diesel and Karanja Biodiesel Blends

    Gupta, Jai Gopal / Agarwal, Avinash Kumar | British Library Conference Proceedings | 2016


    Macroscopic and Microscopic Spray Characteristics of Diesel and Karanja Biodiesel Blends

    Agarwal, Avinash Kumar / Gupta, Jai Gopal | SAE Technical Papers | 2016


    EFFECT OF KARANJA BIODIESEL BLENDS ON THE CHARACTERISTICS OF DIESEL ENGINE

    Sandeep YADAV / Amit KUMAR / Abhilasha CHAUDHARY | DOAJ | 2022

    Freier Zugriff

    Steamships "Kenya" and "karanja"

    Engineering Index Backfile | 1931


    Oxidation Stability, Engine Performance and Emissions Investigations of Karanja, Neem and Jatropha Biodiesel and Blends

    Khurana, D. / Agarwal, A.K. / Society of Automotive Engineers | British Library Conference Proceedings | 2011