Controlling ignition delay is the key to successfully enable partially premixed combustion in diesel engines. This paper presents experimental results of partially premixed combustion in an optically accessible engine, using primary reference fuels in combination with artificial exhaust gas recirculation. By changing the fuel composition and oxygen concentration, the ignition delay is changed.To determine the position of the flame front, high-speed visualization of OH-chemiluminescence is used, enabling a cycle-resolved analysis of OH formation. A clear correlation is observed between ignition delay and flame location.The mixing of fuel and air during the ignition delay period defines the local equivalence ratio, which is estimated based on a spherical combustion volume for each spray. The corresponding emission measurements using fast-response analyzers of CO, HC and NOX confirm the decrease in local equivalence ratio as a function of ignition delay.Furthermore multiple injection strategies are investigated, applying pilot as well as post injections, in combination with a main injection at constant load. From these results it is concluded that both pilot and post injections result in an increase of unburned hydrocarbon and CO emission and a slight decrease of nitric oxide emissions.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Correlating Flame Location and Ignition Delay in Partially Premixed Combustion


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Luijten, C.C.M. (Autor:in) / Aussems, J.E.E. (Autor:in) / Somers, L.M.T. (Autor:in) / de Goey, L.P.H. (Autor:in) / Dam, N.J. (Autor:in) / Zegers, R.P.C. (Autor:in)

    Kongress:

    SAE 2012 International Powertrains, Fuels & Lubricants Meeting ; 2012



    Erscheinungsdatum :

    2012-09-10




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Simultaneous Control of Combustion Timing and Ignition Delay in Multi-Cylinder Partially Premixed Combustion

    Ingesson, Gabriel / Yin, Lianhao / Tunestal, Per et al. | SAE Technical Papers | 2015


    Modeling Ignition and Premixed Combustion Including Flame Stretch Effects

    Onorati, Angelo / Sforza, Lorenzo / Lee, Seong-Young et al. | SAE Technical Papers | 2017


    Analysis of Surrogate Fuels Effect on Ignition Delay and Low Temperature Reaction during Partially Premixed Combustion

    Johansson, Bengt / Solaka, Hadeel / Tuner, Martin | SAE Technical Papers | 2013


    Compression Ignition of Low Octane Gasoline under Partially Premixed Combustion Mode

    AlRamadan, Abdullah / Johansson, Bengt / Im, Hong et al. | SAE Technical Papers | 2018


    Development of a Fuel Injection Strategy for Partially Premixed Compression Ignition Combustion

    Zoldak, Philip / Kumar, Raj / Espinosa, Raul et al. | SAE Technical Papers | 2009