Cold extrusion and forging processes are complex. They require monitoring and controlling the appropriate parameters to ensure high productivity and continued competitiveness of North American press and manufacturing companies. Current average productivity rates in high-volume, high-tonnage operations are often less than 60 percent, and the lost production capacity is mainly due to equipment failures and unreliable process control. The results presented in this paper pertain to identifying root causes for lost production in an automated facility running multiple high tonnage capacity presses and the tools developed to monitor and control the key parameters to improve productivity and eliminate downtime due to catastrophic equipment failure. To gain insight into various equipment and process related phenomena that lower productivity, a spectrum of sensors was installed inside of the dies and on mechanical components of two identical presses in the facility. A system comprising multiple computers and high volume magneto-optical storage archives and analyzes signals from these sensors to monitor the load on various components of the presses, process parameters and tonnage signatures. This system is also able to set control limits on a real-time basis. Detailed information pertaining to sensor placement and data analysis algorithms is presented in the paper. Example results that indicate the feasibility of predictive process control and monitoring as a promising solution for maximizing process efficiency and product quality are also included.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Monitoring and Control of Equipment and Process in Cold Extrusion


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Hitz, D. (Autor:in) / Barnett, K. (Autor:in) / Duggirala, R. (Autor:in) / Spiewak, S. (Autor:in)

    Kongress:

    International Automotive Manufacturing Conference & Exposition ; 1998



    Erscheinungsdatum :

    12.05.1998




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Monitoring and control of equipment and process in cold extrusion

    Barnett,K. / Duggirala,R. / Hitz,D. et al. | Kraftfahrwesen | 1998


    Monitoring and Control of Equipment and Process in Cold Extrusion

    Barnett, K. / Duggirala, R. / Hitz, D. et al. | British Library Conference Proceedings | 1998


    Cold Extrusion of Steel Process and Machine Tools

    Gardner, Robert W. | SAE Technical Papers | 1964



    Cold impact extrusion of aluminium etc.

    Stroud, F. A. / Heywood, K. | TIBKAT | 1947