A novel normal measurement device for robotic drilling and countersinking has been developed. This device is mainly composed of three contact displacement sensors and a spherically compliant clamp pad. The compliance of the clamp pad allows it to be perpendicular to the part when the Multi-Function End Effector (MFEE) drives it to clamp the part surface prior to drilling, while the displacement sensors are used to measure the movement of the clamp pad relative to the MFEE. Once the sensors’ position is calibrated, the rotation angle of the clamp pad can be calculated by the displacement of the sensors. Then, the normal adjustment of MFEE is obtained, and the adjustment process can be achieved by the Rotation Tool Center Point (RTCP) function of robot. Thus, an innovative method based on laser tracker to identify the position of sensors is proposed. The datum plane for calibration can be measured by the laser tracker, and the least square plane fitting method is used to improve the precision. Meanwhile, the expression in terms of the sensors’ position can be established by measuring the calibrated datum using the normal measurement device. As there are two unknown parameters for each sensor’s position, the sensors can be calibrated by two unparallel datum planes. Through the experimental verification, the specially-designed normal measurement device with the proposed calibration method is able to perform the high-accuracy drilling and countersinking on parts with robotic drilling system.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Novel Normal Measurement Method for Robotic Drilling and Countersinking


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Yu, Long (Autor:in) / Bi PhD, Qingzhen (Autor:in) / Zhang, Yilian (Autor:in) / Wang, Yuhan (Autor:in)

    Kongress:

    AeroTech Congress & Exhibition ; 2017



    Erscheinungsdatum :

    19.09.2017




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A Novel Normal Measurement Method for Robotic Drilling and Countersinking

    Yu, Long / Bi, Qingzhen / Zhang, Yilian et al. | British Library Conference Proceedings | 2017


    Robotic Drilling and Countersinking on Highly Curved Surfaces

    Holt, Sean / Clauss, Rider | British Library Conference Proceedings | 2015


    Robotic Drilling and Countersinking on Highly Curved Surfaces

    Clauss, Rider / Holt, Sean | SAE Technical Papers | 2015



    Precise Countersinking Tool

    Jenkins, Eric S. / Smith, William N. | NTRS | 1992