Photographic and performance studies with a Rapid Compression Machine at the Massachusetts Institute of Technology have been used to develop insight into the role of mixing in diesel engine combustion. Combustion photographs and performance data were analyzed. The experiments simulate a single fuel spray in an open chamber diesel engine with direct injection. The effects of droplet formation and evaporation on mixing are examined. It is concluded that mixing is controlled by the rate of entrainment of air by the fuel spray rather than the dynamics of single droplets. Experimental data on the geometry of a jet in a quiescent combustion chamber were compared with a two-phase jet model; a jet model based on empirical turbulent entrainment coefficients was developed to predict the motion of a fuel jet in a combustion chamber with swirl. Good agreement between theory and experiment was obtained. The fuel and air mixing rate was estimated from the jet models and compared with combustion rates measured in the Rapid Compression Machine.Photographic and performance studies with a Rapid Compression Machine at the Massachusetts Institute of Technology have been used to develop insight into the role of mixing in diesel engine combustion. Combustion photographs and performance data were analyzed. The experiments simulate a single fuel spray in an open chamber diesel engine with direct injection. The effects of droplet formation and evaporation on mixing are examined. It is concluded that mixing is controlled by the rate of entrainment of air by the fuel spray rather than the dynamics of single droplets. Experimental data on the geometry of a jet in a quiescent combustion chamber were compared with a two-phase jet model; a jet model based on empirical turbulent entrainment coefficients was developed to predict the motion of a fuel jet in a combustion chamber with swirl. Good agreement between theory and experiment was obtained. The fuel and air mixing rate was estimated from the jet models and compared with combustion rates measured in the Rapid Compression Machine.Photographic and performance studies with a Rapid Compression Machine at the Massachusetts Institute of Technology have been used to develop insight into the role of mixing in diesel engine combustion. Combustion photographs and performance data were analyzed. The experiments simulate a single fuel spray in an open chamber diesel engine with direct injection. The effects of droplet formation and evaporation on mixing are examined. It is concluded that mixing is controlled by the rate of entrainment of air by the fuel spray rather than the dynamics of single droplets. Experimental data on the geometry of a jet in a quiescent combustion chamber were compared with a two-phase jet model; a jet model based on empirical turbulent entrainment coefficients was developed to predict the motion of a fuel jet in a combustion chamber with swirl. Good agreement between theory and experiment was obtained. The fuel and air mixing rate was estimated from the jet models and compared with combustion rates measured in the Rapid Compression Machine.
Photographic and Performance Studies of Diesel Combustion With a Rapid Compression Machine
Sae Technical Papers
International Automobile Engineering and Manufacturing Meeting ; 1974
1974-02-01
Aufsatz (Konferenz)
Englisch
Photographic and Performance Studies of Diesel Combustion with a Rapid Compression Machine
Kraftfahrwesen | 1974
|A Photographic and Thermodynamic Study of Diesel Combustion in a Rapid Compression Machine
SAE Technical Papers | 1981
|A Photographic and Thermodynamic Study of Diesel Combustion in a Rapid Compression Machine
Kraftfahrwesen | 1981
|Photographic Studies of Diesel Combustion in a Quiescent Combustion Chamber
SAE Technical Papers | 1983
|