In this work the authors present a model to simulate the in-cylinder pressure oscillations due to knock. Pressure oscillations are predicted by the explicit integration of a Partial Differential Wave Equation (PDWE) similar, in its structure, to the so-called “Equation of Telegraphy”. This equation differs mainly from the classical wave formulation for the presence of a loss term. The general solution of such equation is obtained by the Fourier method of variables separation. The integration space is a cylindrical acoustic cavity whose volume is evaluated at the knock onset. The integration constants are derived from the boundary and initial conditions.A novel approach is proposed to derive the initial condition for the derivative of the oscillating component of pressure. It descends, conceptually, from the integration of the linearized relation between the derivative of pressure versus time and the expansion velocity of burned gas. In practice, the required calculation parameters are evaluated by means of a two zone thermodynamic processing of single, low-pass filtered pressure cycles.The damping constant, the size and position of the knocking volume of unburned gases at knock onset are the model parameters to be assigned or identified.The model was validated using a set of experimental data obtained using a four cylinder Direct Injection SI engine at different operating conditions. The position of the unburned gases at knock onset was identified through a mean square optimization process based on hybrid genetic algorithms. Even if a simple cylindrical geometry was adopted to include the mass of unburned gases, simulations reproduced experimental measurements with fairly good accuracy.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Modeling Pressure Oscillations under Knocking Conditions: A Partial Differential Wave Equation Approach


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2010 Powertrains Fuels & Lubricants Meeting ; 2010



    Erscheinungsdatum :

    25.10.2010




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch






    Pressure indication during knocking conditions

    Wolfer,P. / Bertola,A. / Stadler,J. et al. | Kraftfahrwesen | 2008



    Surface Temperature and Wall Heat Flux in a Spark-Ignition Engine Under Knocking and Non-Knocking Conditions

    Toda, Fujio / Tsuji, Hiroshi / Ohyagi, Shigeharu et al. | SAE Technical Papers | 1989