This research focuses on the further development of a child finite element model whereby implementation of pediatric cadaver testing observations considering the biomechanical response of the neck of children under tensile and bending loading has occurred. Prior to this investigation, the biomechanical neck response was based upon scaled adult cadaver behaviour. Alterations to the material properties associated with ligaments, intervertebral discs and facet joints of the pediatric cervical spine were considered. No alteration to the geometry of the child neck finite element model was considered. An energy based approach was utilized to provide indication on the appropriate changes to local neck biomechanical characteristics. Prior to this study, the biomechanical response of the neck of the child finite element model deviated significantly from the tensile and bending cadaver tests completed by Ouyang et al. After alteration of the neck biomechanical behaviour was completed the neck tensile force was observed to be within the range of the cadaver tests and the rotation-moment response was in good agreement to the corridor of the pediatric cadaver tests. Utilizing the improved neck model into the child finite element model simulating a FMVSS 213 test resulted in an increase in tensile deformation of on the order of three times and rotational deformation of approximately 37%. Head and chest accelerations from both the child models before and after the neck alterations however remained similar. An important qualitative finding from this investigation indicated that the improved child model appeared to predict an atlanto-occipital dislocation which was observed to occur (in a similar crash condition) to a 23 month-old child. This research was completed in an effort to improve the biofidelity of the child model and the accuracy of child injury prediction in forward facing child restraint seats during numerical simulation of frontal crashes.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Implementation of Child Biomechanical Neck Behaviour into a Child FE Model


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Howard, Andrew (Autor:in) / Mizuno, Koji (Autor:in) / Kapoor, Tanya (Autor:in) / Zhang, Wencheng (Autor:in) / Altenhof, William (Autor:in)

    Kongress:

    SAE World Congress & Exhibition ; 2009



    Erscheinungsdatum :

    2009-04-20




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Implementation of Child Biomechanical Neck Behaviour into the Hybrid III Crash Test Dummy

    Howard, Andrew / Tot, Miroslav / Kapoor, Tanya et al. | SAE Technical Papers | 2008


    Implementation of child biomechanical neck behaviour into the hybrid III crash test dummy

    Tot,M. / Kapoor,T. / Altenhof,W. et al. | Kraftfahrwesen | 2008


    2008-01-1120 Implementation of Child Biomechanical Neck Behaviour into the Hybrid III Crash Test Dummy

    Tot, M. / Kapoor, T. / Altenhof, W. et al. | British Library Conference Proceedings | 2008



    A head-neck biomechanical model of a 6-year-old child for frontal crash studies

    Cazon,A. / Suescun,A. / Univ.of Navarra,ES | Kraftfahrwesen | 2009