The fuel injection pressures used in gasoline direct injection (GDI) engines have increased in recent years to improve fuel efficiency and reduce emissions. Current GDI engines use injection pressures of up to 350 bar, and there is evidence that even higher fuel injection pressures could yield further improvements in atomization. Higher injection pressures could also improve mixture formation by increasing the spray velocity; however, the research with higher injection pressures over 1000 bar is limited due to a limit of mechanical components. This manuscript summarizes experimental investigations into the effect of injection pressure, injection mass, and nozzle shape on spray-induced air motion with ultrahigh injection pressure over 1000 bar. Fuel sprays were generated at a range of injection pressures with different injection masses and nozzle geometries, and Particle Image Velocimetry (PIV) was performed using a Charge-coupled device (CCD) camera and an Nd:YAG (neodymium-doped yttrium aluminium garnet) laser to characterize the vector fields in the surrounding air and the rate of air entrainment into the sprays. Sprays generated with higher injection pressures and injection masses induced stronger large-scale air motion: an injection pressure of 1500 bar with an injection mass of only 5 mg caused almost the same amount of air entrainment as an injection pressure of 200 bar with an injection mass of 27 mg. However, the spray-induced air motion dissipated within 5 ms after the end of injection (EOI) in all cases. The air entrainment rate was also increased by using a divergent nozzle rather than a convergent one. Interactions between the spray and the surrounding air are thus strengthened by using a high injection pressure and a divergent nozzle.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Air Motion Induced by Ultra-High Injection Pressure Sprays for Gasoline Direct Injection Engines


    Weitere Titelangaben:

    Sae Int. J. Fuels Lubr
    Sae International Journal of Fuels and Lubricants


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    2020-09-17


    Format / Umfang :

    13 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Numerical simulation of hollow-cone sprays in gasoline direct-injection engines

    Wakisaka,T. / Imamura,F. / Nguyen,T.T. et al. | Kraftfahrwesen | 2000


    Flashboiling-induced targeting changes in gasoline direct injection sprays

    Kraemer,M. / Kull,E. / Wensing,M. et al. | Kraftfahrwesen | 2016



    Direct injection gasoline engines

    International Fall Fuels and Lubricants Meeting and Exposition | TIBKAT | 2001


    Gasoline direct injection engines

    Spring Fuels and Lubricants Meeting and Exposition / Europäische Kommission | TIBKAT | 2000