Automotive companies are constantly looking to increase the fuel efficiency, shift quality, passenger comfort, and to reduce wear and tear on the components. Most of these aspects depend on the accuracy of torque used for transmission control, which determines the required operational gear position at a given speed and road conditions. Currently, SAE J-1939 CAN bus torque estimation relies on steady state maps that are generated during the calibration of the engine for different speeds and loads. In this paper we report the development of a Virtual Flywheel Torque Sensor (VFTS) useful for real time torque measurement based on an engine speed harmonics analysis. The VFTS uses a signal from the flywheel speed sensor to estimate the flywheel angular acceleration, which and provides a proportional torque value which corresponds to torque at the flywheel. The performance of the VFTS is evaluated using an engine with flywheel attached to driving a dynamometer at different torque loads (100%, 75%, and 50% load) and different speeds (900-1800 RPM). The accuracy of the sensor was found to vary within from 2-12% in the load range tested. The dynamometer test results are further validated using 1D AMESim engine modeling and simulation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Performance of Virtual Torque Sensor for Heavy Duty Truck Applications


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    WCX SAE World Congress Experience ; 2022



    Erscheinungsdatum :

    29.03.2022




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Performance of Virtual Torque Sensor for Heavy Duty Truck Applications

    Iddum, Vivek / Chahal, Iqbal Singh / Bair, John et al. | British Library Conference Proceedings | 2022


    Hydraulic torque converter -- Common-law spouse of heavy-duty truck

    Gibson, W.B. | Engineering Index Backfile | 1953


    HEAVY-DUTY LIFT TRUCK

    HEGEWALD MIKE / THEISSEN LARS MICHAEL / ISHORST HEINZ | Europäisches Patentamt | 2019

    Freier Zugriff

    Heavy duty truck frame

    CAO PINYE / CAO GUOQING | Europäisches Patentamt | 2015

    Freier Zugriff

    Heavy duty truck aerodynamics

    Drollinger,R.A. / Kenworth Truck,US | Kraftfahrwesen | 1987