This paper studied the process development of dissimilar clinch joints in cross-tension specimens of aluminum alloy 5052-H32 (AA5052-H32)/thermoplastic carbon fiber reinforced plastic (TP-CFRP) sheets. The AA5052-H32 and TP-CFRP sheets with a thickness of 1.6 mm were used. The important processing parameters for AA5052/TP-CFRP clinch joints, such as the punching load, heating mode, heating temperature, and die depth, were considered. The failure loads, failure modes, and metallographic micrographs of AA5052/TP-CFRP clinch joints were analyzed to determine an available processing parameter set for fatigue tests. Finally, the fatigue performance and failure mode of AA5052/TP-CFRP clinch joints were obtained.
Process Development of Dissimilar Clinch Joints in Cross-Tension Specimens of AA5052 and TP-CFRP Sheets
Sae Int. J. Adv. and Curr. Prac. in Mobility
WCX SAE World Congress Experience ; 2020
Sae International Journal of Advances and Current Practices in Mobility ; 2 , 4 ; 1764-1773
2020-04-14
10 pages
Aufsatz (Konferenz)
Englisch
Process Development of Dissimilar Clinch Joints in Aluminum 5052-H32 and Thermoplastic-CFRP Sheets
SAE Technical Papers | 2018
|Fatigue Behavior of Self-Piercing Rivets and Clinch Joints in Lap-Shear Specimens of Aluminum Sheets
SAE Technical Papers | 2013
|Fatigue Analysis of Swept Friction Stir Clinch Joints between Aluminum and Steel Sheets
SAE Technical Papers | 2017
|