A variable turbine vane angles turbocharger selection model was developed. The model, which is based on a single entry fixed vanes angle turbocharger matching model developed in earlier study, is of a modular structure and designed to run on a personal computer. It is based on the principles of conservation of mass, energy and momentum in one dimension. A heat transfer sub-model was incorporated to account for the exhaust manifold losses and to overcome undesirable turbine-inlet temperature profile. Non-isentropic flow was assumed through the compressor using one-dimensional, semi-empirical loss calculation formula to improve the prediction accuracy of the model at the compressor exit.The model was verified by comparing the calculated results with the test data of a Rover 2.4 litter direct injection diesel engine fitted with a “3K-K24” type single entry turbocharger. The engine was coupled to an Eddy-current dynamometer and provided with facilities to assess its performance under various running conditions. The verification procedure revealed substantial improvements in the model's accuracy, as compared with the previous model, and a more definitive understanding of its limitations. The benefit of modeling the heat losses from the exhaust manifold was clearly demonstrated. Comparison of the predicted and measured results also revealed that the model could provide a valuable tool in predicting the performance of a variable geometry turbocharger. This in turn confirmed the viability of the improved model and strongly indicated to its suitability in the initial stages of turbocharger matching and design.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Turbocharger Selection Computer Model


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Playfoot, B. B. (Autor:in) / Nasser, S. H. (Autor:in)

    Kongress:

    International Congress & Exposition ; 1999



    Erscheinungsdatum :

    1999-03-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A turbocharger selection computer model

    Nasser,S.H. / Playfoot,B.B. / Univ.of Hertfordshire,GB | Kraftfahrwesen | 1999


    Selection of aircraft turbocharger systems

    Richardson, N. | Tema Archiv | 1979


    Selection of Aircraft Turbocharger Systems

    Richardson, Neil | SAE Technical Papers | 1979


    Turbocharger impeller, method of manufacturing the same, turbocharger, and turbocharger unit

    MATSUDA MASAAKI / TANEDA YOSHIO / HIROTA SHUICHI et al. | Europäisches Patentamt | 2019

    Freier Zugriff

    Material Selection for a Turbocharger Centrifugal Compressor Wheel

    Emara, Ahmed / Soliman, Mostafa / Monieb, H.A. et al. | British Library Conference Proceedings | 2020