An experimental study was conducted using the dumping technique (total cylinder sampling) to produce cylinder mass-averaged nitric oxide histories.Data were taken using a four stroke diesel research engine employing a quiescent chamber, high pressure direct injection fuel system, and simulated turbocharging. Two fuels were used to determine fuel cetane number effects. Two loads were run, one at an equivalence ratio of 0.5 and the other at a ratio of 0.3. The engine speed was held constant at 1500 rpm. Under the turbocharged and retarded timing conditions of this study, nitric oxide was produced up to the point of about 85% mass burned.Two different models were used to simulate the engine run conditions: the phenomenological Hiroyasu spray-combustion model, and the three dimensional, U.W.-ERC modified KIVA-II computational fluid dynamic code. Both of the models predicted the correct nitric oxide trend. Although the modified KIVA-II combustion model using Zeldovich kinetics correctly predicted the shapes of the nitric oxide histories, it did not predict the exhaust concentrations without arbitrary adjustment based on experimental values.
Cylinder-Averaged Histories of Nitrogen Oxide in a D.I. Diesel with Simulated Turbocharging
Sae Technical Papers
International Fuels & Lubricants Meeting & Exposition ; 1994
1994-10-01
Aufsatz (Konferenz)
Englisch
An Experimental Study of Diesel Engine Cylinder-Averaged NOx Histories
SAE Technical Papers | 1978
|An experimental study of Diesel engine cylinder-averaged NOx histories.
Kraftfahrwesen | 1978
|The new BMW 4-cylinder|6-cylinder diesel engine with two-stage turbocharging
Kraftfahrwesen | 2011
|Turbocharging a 6-Cylinder Diesel for Various Ratings and Applications
Kraftfahrwesen | 1981
|Turbocharging a 6-Cylinder Diesel for Various Ratings and Applications
SAE Technical Papers | 1981
|