This study applies Closed-Loop Combustion Control (CLCC) using Variable Compression Ratio (VCR) and cylinder balancing using variable lambda to solve the problem. Step changes of set points for combustion phasing, Compression Ratio (CR), and load together with ramps of engine speed and inlet air temperature are investigated. Performances of the controllers are investigated by running the engine at either a constant amount of injected fuel corresponding to an approximate load of 1.5 or 2.5 bar BMEP and/or constant speed of 2000 rpm. Commercial RON 92 gasoline is used in the test. The CLCC is found to be fast and effective and has a potential of handling step changes in a matter of cycles, while the speed and temperature ramps need some more optimization of the CLCC. The CR controller is very fast and has a time constant corresponding to three engine cycles at 2000 rpm.
HCCI Combustion Phasing with Closed-Loop Combustion Control Using Variable Compression Ratio in a Multi Cylinder Engine
Sae Technical Papers
2003 JSAE/SAE International Spring Fuels and Lubricants Meeting ; 2003
2003-05-19
Aufsatz (Konferenz)
Englisch
HCCI Combustion Phasing in a Multi Cylinder Engine Using Variable Compression Ratio
SAE Technical Papers | 2002
|HCCI combustion phasing in a multi cylinder engine using variable compression ratio
Kraftfahrwesen | 2002
|Closed loop combustion control for HCCI
Tema Archiv | 2008
|Closed loop combustion control for HCCI
Kraftfahrwesen | 2008
|