The Lean NOx Trap (LNT) is an aftertreatment device used to attain a reduction in nitrogen oxide emissions for Diesel and lean burn engines. The LNT is typically used as a storage device, capturing NOx during lean engine operation. The trap can be regenerated by controlling the exhaust air-fuel ratio to create a rich gas mixture. Under rich conditions, the stored NOx is released and catalytically converted. This way, tailpipe emissions can be significantly reduced by properly modulating the lean (storage) and rich (regeneration) periods.To maintain the LNT operate with high conversion efficiency, an optimized control of the regeneration scheduling is required. In addition, LNT systems require fault diagnostic schemes to detect and isolate failures, typically related to sulphur and thermal damages.The paper presents a control-oriented model of a Lean NOx Trap which captures the most relevant phenomena driving the storage and regeneration dynamics. In addition, the model includes a simplified characterization of the LNT fault modes.The model is experimentally validated from data collected on a Diesel LNT system and integrated with a quasi-steady engine and vehicle simulator to estimate tailpipe emissions during driving cycles.
Control-Oriented Modeling of NOx Aftertreatment Systems
Sae Technical Papers
8th International Conference on Engines for Automobiles ; 2007
2007-09-16
Aufsatz (Konferenz)
Englisch
Control-oriented modeling of NOx aftertreatment systems
Kraftfahrwesen | 2007
|Control-Oriented Modeling of NO~x Aftertreatment Systems
British Library Conference Proceedings | 2007
|Control-oriented modeling of a LNT-SCR diesel aftertreatment architecture
Kraftfahrwesen | 2011
|Control oriented models for exhaust gas aftertreatment; a review and prospects
Kraftfahrwesen | 2003
|Modeling of automotive aftertreatment catalysts
Kraftfahrwesen | 1999
|