In this paper, both numerical and experimental results of in-cylinder mixture distribution are presented, and predictions agree with measured data very well. With the simulation technique described herein, mixture ignitability in a port injection gasoline lean-burn engine can be satisfactorily evaluated based on predicted in-cylinder mixture stratification. The validation of the simulation technique can be divided into three stages. First, calculation results of in-cylinder flows are compared with measured data from Particle Image Velocimetry (PIV) measurements. Second, the accuracy of spray calculations is verified by comparing with spray measurements inside an atmospheric pressure bomb. Finally, the validated simulation technique is used to model engine intake and compression strokes with fuel injection. As a result, predicted results of mixture distribution immediately prior to ignition show a good tendency to match fuel vapor concentration distribution measured by Laser Induced Fluorescence (LIF) in an optically-accessed engine. Then, the validated simulation technique is further utilized to analyze mixture stratification mechanisms due to injection timing variations and intake port shapes. A good correlation is found between the predicted in-cylinder mixture distribution and the variation coefficient (co-variance) of indicated mean effective pressure (IMEP) obtained from engine test.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Air/Fuel Distribution Simulation in a Port Injected Gasoline Lean-burn Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Hiraide, A. (Autor:in) / Ishikawa, N. (Autor:in) / Takabayashi, T. (Autor:in)

    Kongress:

    SAE 2001 World Congress ; 2001



    Erscheinungsdatum :

    05.03.2001




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Air/fuel distribution simulation on a port injected gasoline lean-burn engine

    Ishikawa,N. / Hiraide,A. / Takabayashi,T. et al. | Kraftfahrwesen | 2001


    Lean Burn Performance of a Natural Gas Fuelled, Port Injected, Spark Ignition Engine

    Watson, Harry C. / Brear, Michael J. / Abbasi Atibeh, Payman et al. | SAE Technical Papers | 2012


    Lean Burn Performance of a Natural Gas Fuelled, Port Injected, Spark Ignition Engine

    Atibeh, P.A. / Dennis, P.A. / Orbaiz, P.J. et al. | British Library Conference Proceedings | 2012


    Lean burn engine fueled with alcohol gasoline blends

    Gambino,M. / Rizzo,G. / Inst.Motori del CNR,IT et al. | Kraftfahrwesen | 1988


    Lean-Burn Characteristics of a Gasoline Engine Enriched with Hydrogen Plasmatron Fuel Reformer

    Tully, Edward J. / Heywood, John B. | SAE Technical Papers | 2003