The simulation of the combustion process is an essential part of the internal combustion engine development. For simulating whole engine maps quasi-dimensional models in combination with 1-D-flow simulations are widely used. This procedure is beneficial due to short computation times and accurate forecast capability of quasi-dimensional combustion models. For the simulation of homogeneous SI-engines the two-zone entrainment model is usually used, which is based on hemispherical flame propagation.In this work a new approach for the quasi-dimensional calculation of the stratified SI-engine combustion process is proposed, which is based on the two-zone entrainment model. This proven approach was extended with regard to the inhomogeneous air/fuel composition of stratified SI-engines that make a two-zone treatment not sufficient.Therefore, four unburnt zones are defined: a rich zone, a stoichiometrical zone, a lean zone and a remaining air zone. Furthermore in analogy to existing approaches a burnt zone is defined. These zones are connected to each other by mass flow rates which are calculated by a mixture model. This mixture model considers the current geometry of the zones. In order to model the combustion progress a complete new approach for the flame propagation was developed that meets the concerns of the stratified combustion process.The newly developed approach was validated on measurement data of a modern, stratified SI-engine with multiple injection. 158 operating points were validated, that are covering the whole stratified range of the engine. The selected operating points also include a detailed variation of the multiple injection capabilities. A high accuracy of forecast capability could be proven by the new combustion model.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of a Quasi-Dimensional Combustion Model for Stratified SI-Engines


    Weitere Titelangaben:

    Sae Int. J. Engines


    Beteiligte:

    Kongress:

    SAE 2009 Powertrains Fuels and Lubricants Meeting ; 2009


    Erschienen in:

    Erscheinungsdatum :

    2009-11-02


    Format / Umfang :

    10 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Development of a quasi-dimensional combustion model for stratified spark ignition engines

    Schmid,A. / Grill,M. / Berner,H.J. et al. | Kraftfahrwesen | 2009



    Development and calibration of an enhanced quasi-dimensional combustion model for HSDI diesel engines

    Perini,F. / Mattarelli,E. / Univ.di Modena e Reggio Emilia,IT | Kraftfahrwesen | 2011


    Controlled combustion in direct injection stratified charge engines

    Heitland,H. / Rinne,G. / Wislocki,K. et al. | Kraftfahrwesen | 2000