Four ports which have slightly different shapes have been applied to 3-valve MPI SI engine to develop Axially Stratified Lean Combustion engine. The purpose of port modification test was to investigate the effects of swirl ratio and direction on engine performance and emissions.In the engine test injection characteristics, i.e. timing, flow rate, direction as well as port design significantly effected on the engine combustion. Especially, it was observed that injection timing was the most important factor for combustion stability, but its effect on performance has some differences in accordance with the port designs.To verify the relationship between port shape and injection timing, in-cylinder gas was sampled by high speed gas sampling device varing injection timing through whole intake and compression,. strokes at spark plug position and analyzed by gas chromatography. It was assumed that the behavior of fully atomized fuel in the cylinder represented the air motion in intake and compression strokes. For the constraints of the sampling position, the exact tracking of fuel behavior is impossible, but with referring the visualization result concurrently it could be said that not only swirl but also other macro air motion existed in the cylinder and this air motion played almost the same important role for axially stratified charging as well as swirl in case of the port which had relatively low swirl.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of HMC Axially Stratified Lean Combustion Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Lee, Dae-Un (Autor:in) / Ahn, Hee-Seok (Autor:in) / Ohm, In-Young (Autor:in) / Park, Sim-Soo (Autor:in) / Lee, Woo-Jik (Autor:in) / Kim, Woo-Tae (Autor:in)

    Kongress:

    International Congress & Exposition ; 1993



    Erscheinungsdatum :

    01.03.1993




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Development of HMC axially stratified lean combustion engine

    Ohm,I.Y. / Ahn,H.S. / Lee,W.J. et al. | Kraftfahrwesen | 1993


    The Axially-Stratified-Charge Engine

    Quader, Ather A. | SAE Technical Papers | 1982


    The Axially-Stratified-Charge Engine

    Quader,A.A. / General Motors Res.Lab.,US | Kraftfahrwesen | 1982


    Lean burn combustion influence on stratified charge ethanol direct injection engine

    Franco, Rafael Lara / Junior, Carlos Alberto Gomes / Da Costa, Roberto Berlini Rodrigues et al. | British Library Conference Proceedings | 2016


    Lean Burn Combustion Influence on Stratified Charge Ethanol Direct Injection Engine

    Gomes Júnior, Carlos Alberto / Rodrigues Filho, Fernando Antonio / Franco, Rafael Lara et al. | SAE Technical Papers | 2016