The geometric shape of the tires can have a large influence on the aerodynamic drag of a passenger car as it has been shown already in different publications like for example [1, 2, 3]. However, to optimize the shape of a tire, nowadays quite some effort is needed in terms of wind tunnel time and costs for prototype tires. In this paper an approach to optimize the tire's shape in model scale is described, which can help to reduce both development time and costs.The first step in the development of this method was to verify that the aerodynamic effects of the tire geometry in model scale are comparable to full scale tests. This was achieved by measuring different production tires in full scale and also by measuring the quarter scale version of the same tires. The only difference between the original and the model scale tires was that the scaled tires were not deformable. The results show that the difference between two sets of tires is comparable in full scale and in quarter scale.After validating this approach, several model scale tires with different geometries were manufactured and their influences on the aerodynamic forces were investigated. The results show that the aerodynamic efficiency of the tire can often be improved, when the outward shoulder of the tires on the front axle is smoothed. With only minor changes on a production tire, the aerodynamic drag of a vehicle can vary by more than ΔcD = 0.009.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Model Scale Based Process for the Development of Aerodynamic Tire Characteristics


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Wittmeier, Felix (Autor:in) / Wiedemann, Jochen (Autor:in) / Widdecke, Nils (Autor:in) / Kuthada, Timo (Autor:in)

    Kongress:

    SAE 2014 World Congress & Exhibition ; 2014



    Erscheinungsdatum :

    2014-04-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Model Scale Based Process for the Development of Aerodynamic Tire Characteristics

    Wittmeier, F. / Kuthada, T. / Widdecke, N. et al. | British Library Conference Proceedings | 2014


    Model scale based process for the development of aerodynamic tire characteristics

    Wittmeier,F. / Kuthada,T. / Widdecke,N. et al. | Kraftfahrwesen | 2014


    Tire development from an aerodynamic perspective

    Wittmeier,F. / Kuthada,T. / Widdecke,N. et al. | Kraftfahrwesen | 2013


    AERODYNAMIC TIRE TREAD

    MAGEE GARTH L | Europäisches Patentamt | 2015

    Freier Zugriff

    Development of aerodynamic characteristics for motorcycles using scale model wind tunnel

    Gotou, Kazuhiro / Araki, Yuji | SAE Technical Papers | 2001