Nickel based materials of Nimonic C-263 and Waspaloy are used nowadays for aerospace applications owing to its superior strength properties that are maintained at a higher temperature. Tool wear and cutting temperature in the vicinity of cutting edge are two essential machinability characteristics for any cutting tool. In this regard, this study is pursued to examine the influence of factors on measuring of tool wear (Vba) and cutting temperature (Ts) during dry machining of two alloys studied experimentally based on Taguchi method and response surface methodology. Taguchi’s L16 orthogonal array is used to design the experiment and a PVD (TiAlN), CVD (TiN/Al2O3/TiCN) coated carbide inserts are used on turning of two alloys. The factor effect on output responses are studied using analysis of variance, empirical models, and responses surface 3D plots. To minimize the response and to convert into one single optimum level, responses surface desirability function approach is applied. The results show that progress of flank wear associated with Waspaloy is faster that of Nimonic C-263 due to high cutting temperature for Waspaloy that of Nimonic C-263. Abrasion is active wear mechanism for both the alloys with the investigated cutting parameters. Also, plastic deformation and mechanical fracture are observed for both inserts on turning of two alloys. In overall, PVD tool brings down the cutting temperature (10% for Nimonic C-263 and 4% for waspaloy), and flank wear land (31% for Nimonic C-263 and 41% for waspaloy) than that of CVD tool due to its superior tribological properties.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Experimental Study on Tool Wear and Cutting Temperature during Machining of Nimonic C-263 and Waspaloy Based on Taguchi Method and Response Surface Methodology


    Weitere Titelangaben:

    Sae Technical Papers



    Kongress:

    International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility ; 2019



    Erscheinungsdatum :

    2019-10-11




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Machining Nimonic series of alloys

    Engineering Index Backfile | 1950


    Hot torsion testing of Waspaloy

    McQueen, H.J. / Fulop, S. | Tema Archiv | 1978


    Investigation of Parameters for Machining a Difficult-to-Machine Superalloy: Inconel X-750 and Waspaloy

    Vetri Velmurugan, K. / Venkatesan, K. / Devendiran, S. et al. | Springer Verlag | 2018


    Dry Machining of Nimonic 263 Alloy Using PVD and CVD Inserts

    Vetri Velmurugan, K. / Venkatesan, K. / Devendiran, S. et al. | Springer Verlag | 2018