Laminated glass consisting of two soda lime glass plies adhered by a polyvinyl butyral interlayer (PVB) is used for automotive glazing. This paper describes the application of a dynamic, nonlinear finite element method to investigate the failure modes of a laminated glass subjected to low-velocity impact with a spherical headform. Crack type, crack location and crack initiation time are evaluated using the maximum principal stress and J-integral criterion. Failure occurred due to flexural stresses and not bearing stresses. The first crack always initiated at the center of the outer impacted ply and PVB interface, and later on the exterior surface of the inner ply. The PVB thickness and velocity of impact had little or no effect on the first crack initiation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Modeling Fracture in Laminated Automotive Glazing Impacted by Spherical Featureless Headform


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Chai, L. (Autor:in) / Dharani, L. R. (Autor:in) / Zhao, S. (Autor:in) / Barbat, S. D. (Autor:in) / Mettu, S. R. (Autor:in)

    Kongress:

    SAE 2003 World Congress & Exhibition ; 2003



    Erscheinungsdatum :

    03.03.2003




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Modeling fracture in laminated automotive glazing impacted by spherical featureless headform

    Dharani, L.R. / Mettu, S.R. / Zhao, S. et al. | Tema Archiv | 2003


    Modeling Fracture in Laminated Automotive Glazing Impacted by Spherical Featureless Headform

    Dharani, L. R. / Mettu, S. R. / Zhao, S. et al. | British Library Conference Proceedings | 2003


    Modeling fracture in laminated automotive glazing impacted by spherical featureless headform

    Dharani,L.R. / Mettu,S.R. / Zhao,S. et al. | Kraftfahrwesen | 2003


    Development of a Featureless Free-Motion Headform

    Willke, Donald T. / Howe, J. Gavin / Collins, J.A. | SAE Technical Papers | 1991


    Evaluation of safety of helmets using featureless Hybrid III headform

    Deb,A. / Biswas,U. / Ruan,J. et al. | Kraftfahrwesen | 2006