Physical properties of sprayed polyurethane skin for instrument panel were investigated. Optimized sprayed PU(polyurethane) composition for instrument panel was determined by reaction speed measurement, which were polyol of 6000 molecular weight and modified MDI (NCO=25%). For making sprayed PU skin, raw material was sprayed from 15 cm of distance, at 15 g/min of spraying rate, on 70°C of mold, with 75°C of raw material. Sprayed PU skin had lower density than PVC skin when investigating cross sections of skins using scanning electron microscope (SEM). But the reliability test results satisfied all the specification requirements like scratch, chemical resistance, contamination resistance and fogging. Tensile strength, hardness and elongation of sprayed PU skin were slightly changed during heat aging, but the changing rate was much smaller than those of PVC skin.
Physical Properties of Sprayed Polyurethane Skin for Instrument Panel
Sae Technical Papers
SAE 2005 World Congress & Exhibition ; 2005
2005-04-11
Aufsatz (Konferenz)
Englisch
Physical properties of sprayed polyurethane skin for instrument panel
Kraftfahrwesen | 2005
|METHOD FOR MANUFACTURING SKIN MATERIAL FOR INSTRUMENT PANEL AND SKIN MATERIAL FOR INSTRUMENT PANEL
Europäisches Patentamt | 2019
|New Skin for Instrument Panel: SLUSH TPO
SAE Technical Papers | 1999
|New Skin for Instrument Panel: SLUSH TPO
British Library Conference Proceedings | 1999
|Chemical recycling of an all-polyurethane instrument panel - industrial realisation
Tema Archiv | 1996
|