In recent years, there has been a sustained effort by the automotive OEMs and suppliers to improve the vehicle driveline efficiency. This has been in response to customer demands for greater vehicle fuel economy and increasingly stringent government regulations. The automotive rear axle is one of the major sources of power loss in the driveline, and hence represents an area where power loss improvements can have a significant impact on overall vehicle fuel economy. Both the friction induced mechanical losses and the spin losses vary significantly with the operating temperature of the lubricant. Also, the preloads in the bearings can vary due to temperature fluctuations. The temperatures of the lubricant, the gear tooth contacting surfaces, and the bearing contact surfaces are critical to the overall axle performance in terms of power losses, fatigue life, and wear. It is therefore important to understand the temperature variations in an automotive rear axle as a function of operating loads and speeds. However, quantitative understanding of the axle thermal behavior is limited and published information is sparse. This study attempts to bridge this gap.In this paper, an automotive rear drive axle is used to investigate the thermal behavior and power losses under a range of speed and load conditions developed from a typical EPA fuel economy driving cycle. The test axle is instrumented with thermocouples at various critical locations on the rotating and stationary components. A wireless telemetry system was used to extract the temperature readings of those rotating thermocouples. The axle tests were run on a dynamometer with simulated wind cooling and the tests were run till the lubricant reached steady state conditions. Findings from these tests will be discussed in this paper.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Thermal Mapping of an Automotive Rear Drive Axle


    Weitere Titelangaben:

    Sae Int. J. Engines


    Beteiligte:
    Kahraman, Ahmet (Autor:in) / Singh, Avinash (Autor:in) / Maddock, Don (Autor:in) / Xu, Hai (Autor:in) / Hurley, Joshua (Autor:in)

    Kongress:

    SAE 2011 World Congress & Exhibition ; 2011


    Erschienen in:

    Erscheinungsdatum :

    12.04.2011


    Format / Umfang :

    14 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Thermal mapping of an automotive rear drive axle

    Xu,H. / Singh,A. / Maddock,D. et al. | Kraftfahrwesen | 2011


    2011-01-0718 Thermal Mapping of an Automotive Rear Drive Axle

    Xu, H. / Singh, A. / Maddock, D. et al. | British Library Conference Proceedings | 2011


    Automotive rear axle shell

    MA CHUANSHENG | Europäisches Patentamt | 2015

    Freier Zugriff

    Protective rear axle housing for automobile rear drive axle

    GAO ZHEN | Europäisches Patentamt | 2021

    Freier Zugriff

    HYBRID REAR AXLE DRIVE

    LEGE PEER CHRISTOPHER / FRITZ CHRISTIAN / AMANN ANDREAS et al. | Europäisches Patentamt | 2023

    Freier Zugriff