The influence of selected engine oil, fuel, and driving schedule variables on combustion chamber deposits and octane requirement increase (ORI) has been investigated during vehicle fleet tests with late model cars.Greater octane requirement increases occurred with: (a) an engine oil containing bright stock compared to an engine oil without bright stock, (b) an unleaded fuel which contained a polymeric detergent-dispersant additive with a large amount of carrier oil, compared to other unleaded fuels with conventional additive packages, and (c) customer-type driving compared to rapid mileage accumulation on a chassis dynamometer. Octane requirement increase was not affected by: (a) lead content of the fuel; or (b) ashless engine oil compared to a conventional ash-containing oil.All of the ORI with unleaded fuel can be eliminated by removing the combustion chamber deposits, and about two-thirds of the ORI is caused by deposit accumulation in the end-gas region of the chamber. In late model cars using unleaded fuel, about ten percent of the ORI is due to the volume effect of deposits and the other 90 percent is probably due to thermal effects.The influence of selected engine oil, fuel, and driving schedule variables on combustion chamber deposits and octane requirement increase (ORI) has been investigated during vehicle fleet tests with late model cars.Greater octane requirement increases occurred with: (a) an engine oil containing bright stock compared to an engine oil without bright stock, (b) an unleaded fuel which contained a polymeric detergent-dispersant additive with a large amount of carrier oil, compared to other unleaded fuels with conventional additive packages, and (c) customer-type driving compared to rapid mileage accumulation on a chassis dynamometer. Octane requirement increase was not affected by: (a) lead content of the fuel; or (b) ashless engine oil compared to a conventional ash-containing oil.All of the ORI with unleaded fuel can be eliminated by removing the combustion chamber deposits, and about two-thirds of the ORI is caused by deposit accumulation in the end-gas region of the chamber. In late model cars using unleaded fuel, about ten percent of the ORI is due to the volume effect of deposits and the other 90 percent is probably due to thermal effects.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Some Factors Which Affect Octane Requirement Increase


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE Automobile Engineering and Manufacturing Meeting ; 1975



    Erscheinungsdatum :

    1975-02-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch


    Schlagwörter :


    Some factors which affect octane requirement increase.

    Benson,J.D. / General Motors | Kraftfahrwesen | 1975


    Trends in octane number requirement increase

    Callison,J.C. / Wusz,T. / Biller,W.F. et al. | Kraftfahrwesen | 1989


    Factors Affecting OCTANE-NUMBER REQUIREMENT

    GIBSON, HAROLD J. | SAE Technical Papers | 1949



    Octane requirement increase control - a new way of saving

    Nelson,M.L. / Larson,J.E. / Carruthers,M.S. | Kraftfahrwesen | 1991