THIS is a preliminary report of tire tests on cornering and self-alignment torque as they are affected by high-speed driving.Made at 100 mph on a standard chassis and a 10-ft test wheel, the experiments confirmed most previous smaller-scale, lower-speed work; but, the author reports, they also showed that self-aligning torque does not drop off at higher speeds at normal slip angle, as previously believed, and in addition suggested areas of the alignment torque problem which need (and are currently getting) further study.THIS is a preliminary report of tire tests on cornering and self-alignment torque as they are affected by high-speed driving.Made at 100 mph on a standard chassis and a 10-ft test wheel, the experiments confirmed most previous smaller-scale, lower-speed work; but, the author reports, they also showed that self-aligning torque does not drop off at higher speeds at normal slip angle, as previously believed, and in addition suggested areas of the alignment torque problem which need (and are currently getting) further study.THIS is a preliminary report of tire tests on cornering and self-alignment torque as they are affected by high-speed driving.Made at 100 mph on a standard chassis and a 10-ft test wheel, the experiments confirmed most previous smaller-scale, lower-speed work; but, the author reports, they also showed that self-aligning torque does not drop off at higher speeds at normal slip angle, as previously believed, and in addition suggested areas of the alignment torque problem which need (and are currently getting) further study.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    High-Speed Cornering Forces


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Robson, J. J. (Autor:in)

    Kongress:

    Pre-1964 SAE Technical Papers ; 1906



    Erscheinungsdatum :

    01.01.1956




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch


    Schlagwörter :


    High speed cornering forces

    Robson, J.J. | Engineering Index Backfile | 1955




    A Model for Combined Tire Cornering and Braking Forces

    Schuring, D. J. / Pelz, W. / Pottinger, M. G. et al. | British Library Conference Proceedings | 1996


    "Cornering" at high speeds

    Jennings, W. G. | SLUB | 1930