THIS DOCUMENT HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE 5-YEAR REVIEW POLICY. 1 FOR PART NUMBERS AS3112-14 THRU AS3112-17 THE THREAD PD SHALL REPLACE DATUM B. 2 MATERIAL: CORROSION RESISTANT STEEL AMS 5731. 3 MANUFACTURING SPECIFICATION: AMS 7477. 4 FLUORESCENT PENETRANT INSPECTION PER AMS 2645. 5 SURFACE TEXTURE: ANSI B46.1-1962. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 MICROINCHES, (3.2 MICROMETRES) EXCEPT UPSET HEAD. 6 BREAK SHARP EDGES .003-.015 (0.08-0.38) UNLESS OTHERWISE SPECIFIED. 7 DIMENSIONS IN INCHES (MILLIMETRES). METRIC CONVERSIONS ARE INTERNATIONAL SYSTEM UNITS (SI). UNLESS OTHERWISE SPECIFIED, TOLERANCES: ANGULAR DIMENSIONS ±5°. 8 DIMENSIONS AND TOLERANCING: ANSI Y14.5-1973. 9 DO NOT USE UNASSIGNED PART NUMBERS.
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS 5731, .500-20 UNJF-3A
2006-05-03
Aufsatz (Konferenz)
Englisch
Bolts , Identification numbers , Steel , Fibers , Corrosion
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS 5731, .3125-24 UNJF-3A
SAE Technical Papers | 2006
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS 5731, .375-24 UNJF-3A
SAE Technical Papers | 2004
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS 5731, .4375-20 UNJF-3A
SAE Technical Papers | 2004
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS 5731, .5625-18 UNJF-3A
SAE Technical Papers | 2004
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS 5731, .500-20 UNJF-3A
SAE Technical Papers | 2004