A liquid phase sintered valve seat insert has been developed for use in high performance engine. The material consists of Fe-Cr-C sintered alloy in which hard alloys and lubricating alloys dispersed uniformly. High wear resistance can be attained through proper dispersion of these alloys in the matrix. Containing more than 10 % Cr, the matrix material has high heat resistance and creep strength.IN JAPAN MANY CAR manufacturers are now developing new types of maitenance-free engines. These new engines will have a higher performance than that of the present engines. To make high performance engines it is necessary not only to have a good design, but also to improve the material properties used for engine parts. A valve seat insert is one of these parts that must be improved. High performance engines need a valve seat insert that has both wear resistance and heat resistance properties.Several years ago, we developed a double layer valve seat insert by P/M process for high performance diesel engines and have actually utilized it in diesel engines.In prototypes of the neWly developed engines, the insert lacked sufficient wear resistance and heat resistance.Therefore, we have started to develop a liquid phase sintered valve seat insert. The following are some experimental results relating to these properties.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Sintered Valve Seat Insert for High Performance Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Onoda, Mineo (Autor:in) / Motooka, Naoki (Autor:in) / Kuroishi, Nobuhito (Autor:in)

    Kongress:

    SAE International Congress and Exposition ; 1988



    Erscheinungsdatum :

    01.02.1988




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Sintered valve seat insert for high performance engine

    Onodo, M. / Kuroishi, N. / Motooka, N. | Tema Archiv | 1989


    Sintered valve seat insert for high performance engine

    Onoda,M. / Kuroishi,N. / Motooka,N. et al. | Kraftfahrwesen | 1988


    Engine Valve Seat and Insert Wear

    Barber, G. C. / Larson, J. M. / van Diesel, R. et al. | SAE Technical Papers | 1989


    Engine valve seat and insert wear

    Dissel,R.van / Barber,G.C. / Larson,J.M. et al. | Kraftfahrwesen | 1989


    Ceramic Valve and Seat Insert Performance in a Diesel Engine

    Kuonen, Frederick L / Asnani, Manohar | SAE Technical Papers | 1985