The CO2 emission from automobile plants is large. A majority of this quantity comes from the body painting process. A breakdown of CO2 emissions from the painting process shows the significant impact of painting process equipment such as the oven used to cure paint and the air conditioning facilities used to maintain controlled temperature and humidity on CO2 emissions. It was concluded, therefore, that shortening these processes will effectively promote the reduction of CO2 emissions.Removing the primer process means that the basecoat (BC) and clearcoat (CC), which provide color and marketability, would be applied on the E-coat directly. By the removing the primer several issues are raised such as stone chipping resistance, weather durability, color variation and appearance. By contrast, this 3Wet painting system applies two coats of waterborne basecoat, dividing it up into 1-Base and 2-Base and then CC, in order to achieve both targets, quality and color variation.For severe corrosion areas, chipping primer (CP) is applied to keep chipping resistance before the application of 1-Base. Also waterborne chipping primer is required in VOC regulated regions, especially in US. Therefore the most unique feature of this paint process is “4-WET” process. During workability some defects such as popping and sagging can occur affecting the appearance, since three waterborne materials are applied as thick film. So it is necessary to set the viscosity of each layer.The developed 4Wet paint system has achieved primer process removal without the limitation of color variations.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The Development of Primer Process-less Paint System (4WET Paint System by Using Waterborne Chipping Primer)


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Kojima, Keisuke (Autor:in) / Ogawa, Takeshi (Autor:in)

    Kongress:

    SAE 2014 World Congress & Exhibition ; 2014



    Erscheinungsdatum :

    2014-04-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Development of Primer Process-less Paint System

    Kojima, K. / Aoki, T. / Ogawa, T. et al. | British Library Conference Proceedings | 2012


    Physical Properties of Primer less Waterborne Paint for Composite Polypropylene in Instrument Panel (20065430)

    OH< W. / KIM, O. / LEE, J. et al. | British Library Conference Proceedings | 2006


    Development of Robust Anti-chipping Performance Primer for Various Application Process Conditions

    Templeman, Cynthia / Richards, George / Kubish, Scott et al. | SAE Technical Papers | 2016


    Waterborne paint circulation issues

    Boyce,S.T. / Schilling,P. / Becker,E. et al. | Kraftfahrwesen | 1992


    Development of Waterborne Conductive Primer for Motorcycles

    Tanaka, Akiko / Inoue, Masanobu / Mochizuki, Shinsuke et al. | SAE Technical Papers | 2012