Injection rate measurement of an automotive gaseous fuel injector was carried out by use of a one-dimensional pipe flow. A production gaseous fuel injector for an NGV (Natural gas vehicle) was used, which is for an intake port fuel injection. The injection pressure was set at 255 kPa(g), and the injection duration was varied from 3.4 to 20 msec. Nitrogen gas was used as the test gas. The test gas was injected into a pipe from the injector, and the static pressure history was acquired with a piezoelectric pressure transducer. One-dimensional, compressible, inviscid, adiabatic flow was assumed, and the instantaneous mass flow rate inside the pipe was estimated. By integrating the injection rate during the injection duration, the total amount of mass flow per one stroke was calculated. Calibration test was carried out by use of a pressure vessel, from which the total mass flow during one stroke was estimated. Both data are compared, and it is shown that the injection rate measurement was carried out with an error of about 10 %.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Measurement of Instantaneous Flow Rate of an Automotive Gaseous Fuel Injector


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    NAKAMURA, Hisao (Autor:in) / ARAKI, Mikiya (Autor:in) / SHIGA, Seiichi (Autor:in) / OBOKATA, Tomio (Autor:in) / FUJIWARA, Yasuhiro (Autor:in)

    Kongress:

    8th International Conference on Engines for Automobiles ; 2007



    Erscheinungsdatum :

    16.09.2007




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A measurement of instantaneous flow rate of an automotive gaseous fuel injector

    Araki,M. / Fujiwara,Y. / Shiga,S. et al. | Kraftfahrwesen | 2007


    A Measurement of Instantaneous Flow Rate of an Automotive Gaseous Fuel Injector

    Aaraki, M. / Fujiwara, Y. / Shiga, S. et al. | British Library Conference Proceedings | 2007



    Determination of the Instantaneous Fuel Flow Rate out of a Gaseous Fuel Nozzle

    Yi, T. / Santavicca, D. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2009


    Fuel injector for direct injection of gaseous fuel

    Europäisches Patentamt | 2023

    Freier Zugriff