Lower temperatures at the sliding interface of a disc brake will reduce thermal wear and fade tendencies of friction materials. One method for achieving these lower temperatures is to improve the thermal design of gray cast iron discs.The purpose of this investigation was to study design improvements of brake discs for trucks. To accomplish this objective, an analytical thermal model was developed. The model employed the lumped parameter approach, in which the disc was subdivided into a number of small volumes. The model specifically simulated disc temperature response during 80.5 km/h (50 mph) fade tests performed on a dynamometer. The thermal model was correlated with test data to verify and improve its accuracy, and then utilized to evaluate effects of geometry changes.Results showed that mass concentration in the disc faces yields lower temperatures at the friction interface through 10 successive snubs. Even after a very large number of snubs, temperature cycling would be less extreme with thicker faces.The study has demonstrated that thermal modeling is a valid and potentially valuable tool in the design optimization of brake discs. Indeed, the analytical approach, combining both thermal and stress analyses, along with prototype testing, may prove the most effective method for future design development of disc brakes.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Evaluation of Gray Iron Brake Discs for Trucks By Thermal Modeling


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Schwartz, H. W. (Autor:in) / Byers, J. E. (Autor:in) / Hartter, L. L. (Autor:in) / Rhee, S. K. (Autor:in)

    Kongress:

    National Truck Meeting and Exposition ; 1975



    Erscheinungsdatum :

    1975-02-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Evaluation of gray iron brake discs for trucks by thermal modeling

    Schwartz, H. / Hartter, L. / Rhee, S. | Tema Archiv | 1975


    Thermomechanical analysis of vehicles gray iron brake discs

    Belhocine, Ali / Bouchetara, Mostefa | Tema Archiv | 2013


    Functional Coatings of Gray-Cast Iron Brake Discs – Impact on the Tribology

    Gramstat, Sebastian / Mertens, Thilo / Waninger, Robert et al. | Springer Verlag | 2021


    A Comparative Study by Vehicle Testing of Copper Alloy and Gray Iron Brake Discs

    Byers, J. E. / Rhee, S. K. | SAE Technical Papers | 1972


    Evaluating copper alloy brake discs by thermal modeling

    Hartter, L. / Schwarz, H. / Rhee, S. | Tema Archiv | 1974