Engine up rating is not unusual in these days as the need is felt for more energy output from the same volume of the cylinder. This has increased the brake mean effective pressures in the internal combustion engines. The power train components are highly loaded as the peak firing pressures are required to be on the higher side. The connecting rod of such a highly loaded engine was designed with bmep of 2.3 MPa. To overcome the initial failures of the connecting rods it was realized that the critical design review was essential. Classical calculations and FEM studies revealed the stresses in the critical sections. The failures were overcome by the improvements in the geometry of the specific zones. The machining process improvements were necessary to reduce the stress concentration at the bottom of the blind drills. To avoid the rotation of the small bearing bush the surface finish of the connecting rod, the parent bore was improved by burnishing to get better profile metal ratio. The gripping force was improved by use of liquid nitrogen during the assembly of the bush. The durability trials on the improved components showed the increase in the factor of safety from 1.26 to 1.42 and the improvements were also proven to be satisfactory from the field trials.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Study of Connecting Rod for High BMEP Engines


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Dani, A. D. (Autor:in) / Wani, P. R. (Autor:in) / Reddy, P. V. (Autor:in)

    Kongress:

    SIAT 2005 ; 2005



    Erscheinungsdatum :

    19.01.2005




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Steel pistons for high bmep diesel engines?

    Norbye,E. / T and N Technology,US | Kraftfahrwesen | 1988


    Solving Inlet Valve Seat Wear Problem in High BMEP Engines

    Dani, A. D. / Nayak, N. / Lakshminarayanan, P. A. et al. | SAE Technical Papers | 2001


    New Developments in Piston Rings for High BMEP Engines

    McCormick, H. E. / Prasse, H. F. / Anderson, R. D. | SAE Technical Papers | 1969



    Development of H2 direct injection technology for high efficiency / high BMEP engines

    Mumford, D. / Welch, A. / Bartunek, B. | Tema Archiv | 2006