The effects of bead surface roughness on friction, die pickup, and sheet surface damage in the drawbead test were investigated. Beads of HRC 58 hardness were prepared from centerless-ground rod by circumferential honing to 0.05 μm roughness, followed by finishing with 100, 400, or 600 grit SiC paper in the axial direction. Paraffinic base oils with viscosities of 4.5, 30, and 285 mm2/s were used neat and in conjunction with stearic acid.The effects of bead roughness depended on the nature of metal transfer, especially its distribution and firmness of attachment.The presence of a boundary additive increased, decreased, or had no effect on friction depending on the particular coating and bead finish.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effects of Bead Surface Preparation on Friction in the Drawbead Test


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Congress & Exposition ; 1991



    Erscheinungsdatum :

    01.02.1991




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Effect of Bead Finish Orientation on Friction and Galling in the Drawbead Test

    Dalton, Gregory M. / Schey, John A. | SAE Technical Papers | 1992


    Effect of bead finish orientation on friction and galling in the drawbead test

    Dalton,G.M. / Schey,J.A. / Univ.of Waterloo,US | Kraftfahrwesen | 1992


    Drawbead Restraining Force Modeling: Nonlinear Friction

    Ren, Feng / Chappuis, Laurent / Xia, Z. Cedric | SAE Technical Papers | 2009


    Variation of Friction in a Strip Test Apparatus with Controllable Drawbead Penetration

    Michler, J.R. / Weinmann, K.J. | SAE Technical Papers | 1995


    Variation of friction in a strip test apparatus with controllable drawbead penetration

    Michler,J.R. / Weinmann,K.J. / Michigan Technol.Univ.,US | Kraftfahrwesen | 1995