The combination of wood and steel together gives better properties than individual materials used alone. The advantage associated with this type of hybridization is composite systems are better than that of non-composite system of same size because the system is stiffer. The purpose of utilization of steel with timber members is mainly for stiffness and strength. Steel adds ductility to composite system.The paper presents the experimental results of the work carried out to study the behavior of specimens prepared in solid teakwood, hollow sectioned steel tube and teakwood filled hollow sectioned steel tube under compression. The circular, rectangular and squared sections were used for study. The interfacial bond between wood and steel is obtained by interference fit and by suitable adhesive for wood-steel composite system.Experimental results showed that Hollow sectioned square steel tube and solid sectioned square teakwood specimens showed highest compressive strength and compressive strength of circular cross sections were lowest. The results for rectangular were in-between square and circular sections. Incase of composites with adhesive and without adhesive square sectioned specimens showed highest compressive strength, and compressive strength of circular cross sections was lowest, the results for rectangular were in-between square and circular sections. When results of composite without adhesive and with adhesive were compared the highest compressive strength observed in all cases of composites with adhesive. The results obtained experimentally were verified with finite element analysis tool ANSYS. Suitable design codes of concrete filled tubes in practice are used to predict the strengths. The results by both the method are comparable and are within the acceptable limits.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Material Properties of Hollow Sectioned Steel Tubes and Wood Filled Hollow Sectioned Steel Tubes under Compression


    Weitere Titelangaben:

    Sae Technical Papers



    Kongress:

    SAE 2014 World Congress & Exhibition ; 2014



    Erscheinungsdatum :

    01.04.2014




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Flexural Strength Properties of Teak Wood Filled Rectangular Hollow Sectioned Thin Steel Tube and its Application in Automobile

    Danawade, B. / Malagi, R. / Malagi, S. et al. | British Library Conference Proceedings | 2013


    Flexural Strength Properties of Teak Wood Filled Rectangular Hollow Sectioned Thin Steel Tube and its Application in Automobile

    Danawade, Bharatesh / Malagi, Ravindra / Malagi, Suprit | SAE Technical Papers | 2013


    Asymmetric sectioned convex mirrors

    ENGLANDER BENJAMIN / SERER JULIAN | Europäisches Patentamt | 2018

    Freier Zugriff

    Asymmetric sectioned convex mirrors

    ENGLANDER BENJAMIN / SERER JULIAN | Europäisches Patentamt | 2016

    Freier Zugriff

    Loaded sectioned space elevator

    Sadov, Yu. A. / Nuralieva, A. B. | Online Contents | 2015