Roof racks are designed for carrying luggage during customers' travels. These rails need to be strong enough to be able to carry the luggage weight as well as be able to withstand aerodynamic loads that are generated when the vehicle is travelling at high speeds on highways. Traditionally, roof rail gage thickness is increased to account for these load cases (since these are manufactured by extrusion), but doing so leads to increased mass which adversely affects fuel efficiency.The current study focuses on providing the guidelines for strategically placing lightening holes and optimizing gage thickness so that the final design is robust to noise parameters and saves the most mass without adversely impacting wind noise performance while minimizing stress. The project applied Design for Six Sigma (DFSS) techniques to optimize roof rail parameters in order to improve the load carrying capacity while minimizing mass.The analysis model consisted of a finite element model of a roof rack system. The numerical simulation runs were made on LS-Dyna software. Taguchi's orthogonal array was used to build factorial response plots for signal to noise ratio and main effects. Load carrying capacity and mass were considered as two primary responses and the optimum design was determined by maximizing load capacity while minimizing mass. Some of the important parameters being considered were part thickness, material selection, hole size, hole spacing, hole to attachment interface, and crossbar location. Based on response plots, these parameters were rank ordered for best performance. The results provided guidelines and enormous benefits to engineers for designing light weight flush mounted roof racks in current and future vehicles.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Robust Design of a Light Weight Flush Mount Roof Rack


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2011 World Congress & Exhibition ; 2011



    Erscheinungsdatum :

    12.04.2011




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Robust design of a light weight flush mount roof rack

    Mandadapu,S. / chinta,B. / Jutila,B. et al. | Kraftfahrwesen | 2011


    2011-01-1274 Robust Design of a Light Weight Flush Mount Roof Rack

    Mandadapu, S. / Chinta, B. / Jutila, B. et al. | British Library Conference Proceedings | 2011


    Flush roof rack mounting mechanism

    GU JIANCHUN / SUN LIRONG | Europäisches Patentamt | 2025

    Freier Zugriff

    Roof rack mount for a vehicle having a removable roof

    STOJKOVIC DRAGAN B / HOFFMAN COLLEEN MARIE / MARCHLEWSKI JACK et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Universal Mount System For Vehicle Roof Rack

    QUACH TIGER | Europäisches Patentamt | 2022

    Freier Zugriff