Recently, a tendency is consolidating to produce low displacement turbocharged spark-ignition engines. This design philosophy, known as “engine downsizing”, allows to reduce mechanical and pumping losses at low load as a consequence of the higher operating Brake Mean Effective Pressure (BMEP). The presence of the turbocharger allows to restore the maximum power output of the larger displacement engine. Additional advantages are a higher low-speed torque and hence a better drivability and fun-to-drive. Of course, at high loads, the spark-advance must be carefully controlled to avoid the knock occurrence and this determines a substantial penalization of the fuel consumption. The knowledge of the knock-limited spark timing is hence a key point in order to reduce the fuel consumption drop at high loads.
Cycle-by-Cycle Analysis, Knock Modeling and Spark-Advance Setting of a “Downsized” Spark-Ignition Turbocharged Engine
Sae Int. J. Engines
9th International Conference on Engines and Vehicles ; 2009
Sae International Journal of Engines ; 2 , 2 ; 381-389
2009-09-13
9 pages
Aufsatz (Konferenz)
Englisch
Knock Resistance in a Small Turbocharged Spark-Ignition Engine
SAE Technical Papers | 2006
|Turbocharged Spark Ignition Engine Simulation
SAE Technical Papers | 1984
|Turbocharged spark ignition engine simulation
Kraftfahrwesen | 1984
|LES Modelling of Spark-Ignition Cycle-to-Cycle Variability on a Highly Downsized DISI Engine
SAE Technical Papers | 2015
|