The Cannon High Temperature High Shear (HTHS) capillary viscometer is currently used in the ASTM D4624 procedure to measure the viscosity of polymer containing lubricants at 150°C and shear rate of 106 sec-1. An expansion of the utility of this Cannon instrument is described in this paper to cover the temperature range of lubricants from 35 to 175°C and shear rates of up to 106 sec-1. A finite difference model is used to solve the transport equations for capillary flow at each temperature. The solution accounted for temperature, pressure, non-Newtonian and kinetic energy effects on viscosity. Fitting these data to a double truncated power law model provides the incipient non-Newtonian shear rate γ̇1, the power law index n, and the incipient second Newtonian shear rate γ̇2. All these parameters can be measured at temperatures of around 100°C or less. The n and γ̇2 were found to be regular functions of temperature while γ̇i is always in the measured range. The behavior of typical polymer containing multigrade crankcase lubricants fit this model thus providing an accurate measure of viscosity at 150°C and 106 sec-1 shear rate and allowing for an accurate prediction of viscosities at temperatures of 150 to 175°C and 107 sec-1 shear rates.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Extension of the Temperature and Shear Rate Range for Polymer Containing Lubricants Using the Cannon HTHS Capillary Viscometer


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Klaus, E. E. (Autor:in) / Duda, J. L. (Autor:in) / Bala, V. (Autor:in) / Palekar, V. (Autor:in)

    Kongress:

    International Fuels & Lubricants Meeting & Exposition ; 1993



    Erscheinungsdatum :

    01.10.1993




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Multicell High-Temperature High-Shear Capillary Viscometer

    Manning, Robert E. / Lloyd, Wallis A. | SAE Technical Papers | 1986


    Multicell High-Temperature High-Shear Capillary Viscometer

    Manning,R.E. / Lloyd,W.A. / Cannon Instrument,US | Kraftfahrwesen | 1986


    Development of a high shear rate capillary viscometer for engine oils

    Rein,S.W. / Alexander,D.L. / Texaco,Beacon Res.Lab.,US | Kraftfahrwesen | 1980


    Development of a High Shear Rate Capillary Viscometer for Engine Oils

    Alexander, David L. / Rein, Samuel W. | SAE Technical Papers | 1980