This work presents the autoignition delay time characteristics of methane and natural gas under simulated diesel engine conditions. A constant-volume combustion vessel is used for the experiments. Results are presented for the pressure and temperature ranges of 5 to 55 atm and 600 to 1700 K, respectively. Comparisons are then made with autoignition data for methanol, ethanol, isooctane, and n-cetane. Three major trends are observed. First, there is little effect on the autoignition delay time of natural gas as the vessel pressure is increased from 5 to 55 atm. Second, there is a slight decrease in the autoignition delay time of methane-ethane gas mixtures as the concentration of ethane is increased. Third, the autoignition delay time of natural gas is strongly dependent on temperature and continually decreases with increasing temperature. From a pragmatic point of view, it is shown that the use of methane or natural gas as a compression-ignited diesel fuel is impractical in a conventional diesel engine due to the high temperature of between 1200 to 1300 K needed to reduce the autoignition delay time to practical values (∼ 2 ms).
Autoignition of Methane and Natural Gas in a Simulated Diesel Environment
Sae Technical Papers
International Congress & Exposition ; 1991
01.02.1991
Aufsatz (Konferenz)
Englisch
Autoignition of methane and natural gas in a simulated diesel environment
Kraftfahrwesen | 1991
|Autoignition of biodiesel, methanol, and 50:50 blend in a simulated diesel engine environment
Kraftfahrwesen | 1995
|Autoignition of Biodiesel, Methanol, and a 50:50 Blend in a Simulated Diesel Engine Environment
British Library Conference Proceedings | 1995
|Autoignition of Biodiesel, Methanol, and a 50:50 Blend in a Simulated Diesel Engine Environment
SAE Technical Papers | 1995
|Natural gas autoignition under diesel conditions:experiments and chemical kinetic modeling
Kraftfahrwesen | 1994
|