Electronic fuel injection of internal combustion engines is an accurate means of preparing the proper air-to-fuel mixture for the individual cylinders under all operating conditions. The precise amount of fuel required by the engine for any given cycle depends directly upon the amount of air ingested during each stroke.Fuel delivery is accurately regulated via a number of sensors located strategically around the engine. These sensors convert physically measurable quantities, such as engine speed and manifold absolute pressure, into proportional electrical signals which are processed by an electronic control unit (ECU). The ECU, in turn, is programmed to determine nearly instantaneously the amount of fuel necessary to ensure the highest torque, best fuel economy, and lowest exhaust emissions under the prevailing conditions represented by the input sensor signals. Fuel delivery to each cylinder is controlled by a precision electromagnetic valve (injector) whose on-time is determined by the width of the command pulse generated by the ECU.The information required to calibrate the ECU for a given engine is obtained from characterization studies; the data thus acquired are reduced to a matrix which can be described as a three-dimensional control surface. The basic calibration can be modified to enrich the fuel mixture for cold start, warmup, hot engine restart, and transients by means of the temperature and throttle angle sensors.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Fundamentals of Electronic Fuel Injection


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Gyorki, J. (Autor:in)

    Kongress:

    1974 Automotive Engineering Congress and Exposition ; 1974



    Erscheinungsdatum :

    1974-02-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Fundamentals of Electronic Fuel Injection

    Gyorki,J. / Bendix,Electron.Fuel Inject.Div.,Troy,US | Kraftfahrwesen | 1974


    Fundamentals of modern diesel fuel injection

    Glamann, W. | Engineering Index Backfile | 1937


    Electronic Fuel Management–Fundamentals

    Bowler, Lauren L. | SAE Technical Papers | 1980


    Electronic Fuel Management - Fundamentals

    Bowler,L.L. / General Motors Engng.Staff,US | Kraftfahrwesen | 1980


    Fuel cell fundamentals

    O'Hayre, Ryan P. / Cha, Suk-Won / Colella, Whitney G. et al. | TIBKAT | 2009