The UNIBUS (Uniform Bulky Combustion System) based on the HCCI (Homogeneous Charge Compression Ignition) concept uses an early injection quantity, timing, boost pressure, EGR, etc. for ignition control [1]. To further expand the operation range from the present level, the effects of the atmospheric conditions on ignition and combustion were calculated using CHEMKIN in the present study. When controlling the start timing of the high temperature reaction to suppress the early ignition, it is more effective to apply EGR than boost pressure. If fuel quantity is increased to expand load, it is possible to suppress a sharp cylinder pressure rising rate by increasing the boost pressure. Furthermore, it has become apparent that the cause of this is an increase in heat capacity.
Numerical Analysis of Ignition Control in HCCI Engine
Sae Technical Papers
2003 JSAE/SAE International Spring Fuels and Lubricants Meeting ; 2003
19.05.2003
Aufsatz (Konferenz)
Englisch
Numerical analysis of ignition control in HCCI engine
Kraftfahrwesen | 2003
|Homogeneous Charge Compression Ignition (HCCI) Engine
SAE Technical Papers | 2009
|Homogeneous charge compression ignition ( HCCI ) engine
Kraftfahrwesen | 2009
|Gas Temperature Measurements During Ignition in an HCCI Engine
SAE Technical Papers | 2003
|Gas temperature measurements during ignition in an HCCI engine
Kraftfahrwesen | 2003
|