Structure borne sound is one of the most important reasons of noise pollution in the automobiles and aircraft's. Noise is mostly generated by the vibrating panels excited by either a mechanical or an acoustical excitation. Examples of the typical vibrating structures in automobiles are engine cylinder, gearbox cover, transmission system covers, panels of the body etc. Sound radiation characteristics are also important in the phenomenon of resonant sound transmission through a panel. Resonant sound transmission occurs because of resonant modes of the panel within the frequency bandwidth of interest. Typical example of resonant sound transmission is the transmission through a firewall of an automobile, which forms the partition between the engine compartment and the cabin interior. Radiation characteristics can be typically defined by radiated sound power, radiation efficiency and space average mean square velocity of the panel. These radiation characteristics of the panels depend on the distribution of mass, stiffness and damping along the plate. Recent advances in composite technology have enabled the panel designs with complicated distribution of material properties. Design of such panels can be a challenging task since it involves a number of parameters. There can be a large number of feasible solutions with different values of parameters. Several optimization methods can be employed for finding an optimum set of variables which will give minimum value of the objective function.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Prediction and Optimization of radiated sound power and radiation efficiency of vibrating structures using FEM


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2000 World Congress ; 2000



    Erscheinungsdatum :

    06.03.2000




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Prediction and Optimization of Radiated Sound Power and Radiation Efficiency of Vibrating Structures Using FEM

    Patil, A. R. / Crocker, M. J. / Society of Automotive Engineers | British Library Conference Proceedings | 2000



    Minimizing Radiated Sound Power from Vibrating Shells

    Constans, E. / Belegundu, A. / American Institute of Aeronautics and Astronautics et al. | British Library Conference Proceedings | 1996


    Minimizing radiated sound power from vibrating shells

    Constans, Eric / Belegundu, A. | AIAA | 1996