The seat frame to be applied to future autonomous vehicles is expected to be rotatable considering various seating configurations. For the rotatable or swivel seat frame, it might be more difficult to secure passenger-related safety performances including seat belt anchorage (SBA) strength than a conventional seat frame because the conventional seat frame has two seat belt anchoring points on the body center pillar whereas those points of the swivel seat frame should be all located within the rotating structures in the seat frame. Since the swivel seat frame adds a structure for rotation, the mass of the swivel seat frame significantly increases compared to the nonrotatable seat frame, which may become an obstacle to reducing the mass of the vehicle. Currently, there are not many cases of mass production of rotating vehicle seats, and there are hardly any reports of mass reduction through advanced steel materials or corresponding numerical safety performance. In this study, the mass of the swivel assembly, the core part of the swivel seat frame, was reduced by more than 22.8% by establishing a baseline model of the swivel seat frame through benchmarking, applying advanced steel materials to it, and improving the structural design. In addition, a swivel assembly concept with an improved structure for better safety performance was derived, and the steel grade and gauge of the relevant core parts were optimized using a commercial program LS-OPT and various libraries of Python, an open-source programming language. The lightweight concepts and various solutions derived from this study are expected to be a good starting point for applying advanced steel grades to future seat frames.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Lightweight Swivel Seat Frame Concepts Using Advanced Steel Grades


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Kim, Jaehyun (Autor:in)

    Kongress:

    Automotive Technical Papers ; 2023



    Erscheinungsdatum :

    2023-04-21




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    SWIVEL SEAT

    OKAMOTO HISAYA / ITO SADAO | Europäisches Patentamt | 2022

    Freier Zugriff

    Swivel frame

    KOTANI SATORU / SAIKI KENICHI / KUSAMA KENZO et al. | Europäisches Patentamt | 2018

    Freier Zugriff

    Vehicle swivel seat

    STURHAN WILHELM / KARALASH DAN | Europäisches Patentamt | 2021

    Freier Zugriff

    Swivel seat system

    LINE JOHNATHAN ANDREW / KONDRAD MARCOS SILVA / HOERNKE SPENCER ROBERT et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    SEAT SWIVEL LIMITER

    LINNBERG JEFFREY | Europäisches Patentamt | 2020

    Freier Zugriff