With the introduction of CO2 air conditioning systems for vehicle applications, there was a renewed requirement for improved accumulator design and understanding. A technique was needed to help size accumulators so that they are large enough to function properly but not so large to add unnecessary volume and weight to the A/C system. Also, a better technique was needed to evaluate accumulator designs. Using a clear accumulator and R134a refrigerant, tests were conducted to determine the liquid storage in the accumulator under various operating conditions. The clear accumulator also allowed analysis of several types of accumulator functional failures, such as excess liquid carryover and insufficient liquid/gas separation. An evaluation technique was developed that relied not on comparing one accumulator design to another, as has been done in the past, but rather comparing an accumulator to a system baseline without an accumulator. These no-accumulator tests gave a baseline of optimum system performance, and thus allowed accumulator designs to be compared to the “best case” scenario for a given system. The variations in charge levels between the baseline tests and accumulator tests showed the impact of the accumulator on A/C systems in terms of liquid storage requirements and required system charges. With these techniques, a sizing procedure for accumulators was proposed that can be applied to both R134a and CO2 systems.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Accumulator Sizing and Evaluation Technique Based on Theoretical Optimum System Performance


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    Vehicle Thermal Management Systems Conference & Exposition ; 2005



    Erscheinungsdatum :

    2005-05-10




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Accumulator sizing and evaluation technique based in theoretical optimum system performance

    Finlayson,S.M. / Dickson,T.R. / Halla Climate Control Canada,CA | Kraftfahrwesen | 2005


    Optimal Accumulator Sizing for Mobile Applications

    Roston, Gerald / O'Brien II, James A. / Witte, Matthew | SAE Technical Papers | 2011


    Optimal accumulator sizing for mobile applications

    OBrien,J.A. / Roston,G. / Witte,M. et al. | Kraftfahrwesen | 2011


    2011-01-0715 Optimal Accumulator Sizing for Mobile Applications

    O Brien, J.A. / Roston, G. / Witte, M. et al. | British Library Conference Proceedings | 2011


    Optimum structural sizing for gust-induced response

    HAJELA, P. / BACH, C. T. | AIAA | 1989