The increasing number of gasoline direct injection (GDI) vehicles on the roads has drawn attention to their particulate matter (PM) emissions, which are greater both in number and mass than port fuel injected (PFI) spark ignition (SI) engines [1]. Regulations have been proposed and implemented to reduce exposure to PM, which has been shown to have negative impacts on both human health and the environment [2, 3]. Currently, the gasoline particulate filter (GPF) is the proposed method of reducing the amount of PM from vehicle exhaust, but modifications to improve the filtration efficiency (FE) and reduce the pressure drop across the filter are yet needed for implementation of this solution in on-road vehicles. This work evaluates the impacts of wall thickness and cell density on filtration efficiency and backpressure using a benchtop filtration system. For both unmodified and modified GPFs, the filtration efficiency was studied using a scanning mobility particle sizer (SMPS), and the pressure drop across the filter was obtained using a differential pressure transducer. The performance of the unmodified GPFs were investigated at three space velocities: 15,000 hr-1, 30,000 hr-1, and 60,000 hr-1. Increasing space velocity through unmodified GPFs results in decreasing FE by approximately 5% for every 15,000 hr-1 increase, which means a GPF has its lowest FE and highest pressure drop at 60,000 hr-1. The GPF with lowest initial FE and pressure drop, 300-10, was modified by preloading calcium sulfate (CaSO4) to form a cake layer on the walls. The improvement of about 10% to the filtration efficiency and increase of about 6% to the pressure drop when loaded to 20 g/L indicates that a preloaded cake layer can improve performance with less penalty than increasing wall thickness.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Benchtop Investigation of Filtration Efficiency and Pressure Drop Behavior of Commercial High Porosity Gasoline Particulate Filters


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Powertrains, Fuels & Lubricants Meeting ; 2019



    Erscheinungsdatum :

    2019-01-15




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    CATALYST COATED GASOLINE PARTICULATE FILTERS: FILTRATION EFFICIENCY AND CATALYTIC ACTIVITY

    Hergueta, C. / Bogarra, M. / Tsolakis, A. et al. | TIBKAT | 2020


    Pressure Drop Performance of Gasoline Particulate Filters - Experimental and Modeling Study

    Zielinski, Ashley / Gillim, Austin / Thornton, Megan et al. | SAE Technical Papers | 2022


    Filtration Efficiency and Pressure Drop Performance of Ceramic Partial Wall Flow Diesel Particulate Filters

    Heibel, Achim / Henrichsen, Matthew / Tandon, Pushkar et al. | SAE Technical Papers | 2013


    Pressure Drop Performance of Gasoline Particulate Filters - Experimental and Modeling Study

    Kannan, Rajesh / Ramappan, Vijay / Mehta, Zubin et al. | British Library Conference Proceedings | 2022