Selective catalytic reduction (SCR) is a promising technology for diesel aftertreatment used to reduce NOX emission effectively. SCR can be used to meet Euro - and even stricter emission standards. Dosing of urea must be controlled to lower NOX emission and NH₃ slip synchronously under the emission standard limits.A type of closed-loop control strategy based on NOX sensors for SCR system was presented in this paper. To detect NOX emissions, two NOX sensors were installed before and after the catalyst. Meanwhile, to examine the trade-off relationship between NOX emission and NH₃ slip, influences of different control parameters to the control purpose were explored. These influences include space velocity, catalyst temperament, NOX conversion efficiency, NH₃ adsorption and desorption characteristics, and so on. Results were used to optimize the dosing control strategy of urea. Base dosage of urea was confirmed based on the signals of NOX sensor. Subsequently, correct dosage of urea was given based on the NH₃ adsorption model, NOX conversion efficiency, delay algorithm, NOX feedback correction, and so on. Actual dosage of urea is the sum of base and correction dosage.Test results of the ETC and the ESC indicated that the SCR system with closed-loop control dosing strategy effectively meet the NOX limit of Euro V emission standard.
Development of Closed-loop Control Strategy for Urea-SCR Based on NOX Sensors
Sae Technical Papers
SAE 2011 World Congress & Exhibition ; 2011
2011-04-12
Aufsatz (Konferenz)
Englisch
Development of closed-loop control strategy for urea-SCR based on NOx sensors
Kraftfahrwesen | 2011
|2011-01-1324 Development of Closed-loop Control Strategy for Urea-SCR Based on NO~x Sensors
British Library Conference Proceedings | 2011
|Model-based closed-loop control of urea SCR exhaust aftertreatment system for diesel engine
Kraftfahrwesen | 2002
|Model-based Closed-loop Control of Urea SCR Exhaust Aftertreatment System for Diesel Engine
SAE Technical Papers | 2002
|Closed Loop Ignition and Fueling Control Using Optical Combustion Sensors
SAE Technical Papers | 1990
|