The effects of jet-jet angle on the combustion process were investigated in an optical accessible rapid compression and expansion machine (RCEM) under various injection conditions and intake oxygen concentrations. The RCEM was equipped with an asymmetric six-hole nozzle having jet-jet angles of 30° and 45°. High-speed OH* chemiluminescence imaging and direct photo imaging using the Mie scattering method captured the transient evolution of the spray flame, characterized by lift-off length and liquid length. The RCEM operated at 1200 rpm. The injection timing was -5°ATDC, and the in-cylinder pressure and temperature were 6.1 MPa and 780 K at the injection timing, respectively, which achieved a short ignition delay. The effects of injection pressure, nozzle hole diameter, and oxygen concentration were investigated. The results show that the liquid and lift-off length of the jet-jet angle of 30° were shorter than those of the jet-jet angle of 45°, irrespective of injection conditions and oxygen concentration. Particularly, when the injection rate was high with high injection pressure and a large nozzle hole, the liquid and lift-off length rapidly and simultaneously decreased, but when the injection pressure was low or the nozzle hole diameter was small, the lift-off length decreased first, and then the liquid length decreased.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effect of Jet-Jet Angle on Combustion Process of Diesel Spray in an RCEM


    Weitere Titelangaben:

    Sae Int. J. Adv. and Curr. Prac. in Mobility


    Beteiligte:
    Kawanabe, Hiroshi (Autor:in) / Jo, Hyun (Autor:in) / Hayashi, Jun (Autor:in) / Horibe, Naoto (Autor:in) / Ishikawa, Taichi (Autor:in) / Ishiyama, Takuji (Autor:in)

    Kongress:

    SAE Powertrains, Fuels & Lubricants Meeting ; 2020



    Erscheinungsdatum :

    15.09.2020


    Format / Umfang :

    11 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Effect of Jet-Jet Angle on Combustion Process of Diesel Spray in an RCEM

    Jo, Hyun / Ishikawa, Taichi / Horibe, Naoto et al. | British Library Conference Proceedings | 2020


    Effect of Jet-Jet Angle on Combustion Process of Diesel Spray in an RCEM

    Jo, Hyun / Ishikawa, Taichi / Horibe, Naoto et al. | British Library Conference Proceedings | 2020


    Investigating the Cause of Late Combustion in Diesel Engine by Using RCEM

    Fukuchi, Shoichi / Masuda, Hiroyuki / Matsumura, Eriko et al. | British Library Online Contents | 2016


    Experimental study on the combustion characteristics of emulsified diesel in a RCEM

    Park,J.W. / Huh,K.Y. / Park,K.H. et al. | Kraftfahrwesen | 2000


    Numerical Simulations of Pre-Chamber Combustion in an Optically Accessible RCEM

    Shapiro, Evgeniy / Boulouchos, Konstantinos / Kotzagianni, Maria et al. | SAE Technical Papers | 2019