In this study, spark-ignition engine knock was studied experimentally. Cylinder pressure and cylinder block vibration of a four cylinder SI engine were measured. Knock characteristics, such as knock intensity, knock cycle percentage, knock occurrence crank angle, were determined from pressure and vibration signals using different analysis methods.Methods using band-pass filter, third derivative and step method, which was developed in this study, were shown to be the most suitable. The step method only used signals above threshold value during knocking and, as a result, both pressure and vibration signal analysis results with this method showed good signal-to-noise ratio.The knock intensities calculated from cylinder pressure and block vibration were proportional to each other over a wide range. It was confirmed in this study that vibration signals were useful in knock detection. More accurate results were achieved by using narrow band-pass filtering frequency range which avoided engine's resonance frequencies.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Measurement and Analysis of Knock in a SI Engine Using the Cylinder Pressure and Block Vibration Signals


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Chun, Kwang Min (Autor:in) / Kim, Kyung Woon (Autor:in)

    Kongress:

    International Congress & Exposition ; 1994



    Erscheinungsdatum :

    01.03.1994




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    A New Knock-Detection Method using Cylinder Pressure, Block Vibration and Sound Pressure Signals from a SI Engine

    Jeon, Dong-Chan / Lim, Jin-Soo / Lee, Jong-Hwa et al. | SAE Technical Papers | 1998



    Gasoline Engine Knock Analysis using Cylinder Pressure Data

    Pond, Christopher R. / Biundo, John / Brunt, Michael F.J. | SAE Technical Papers | 1998


    Gasoline engine knock analysis using cylinder pressure data

    Brunt,M.F. / Pond,C.R. / Biundo,J. et al. | Kraftfahrwesen | 1998